What about gamo urban barrel on a notos - though ive heard of that being done - a people say the BSA/Gamo barrels are very nice and what make the urban shine
Upvote 0
are there any compatible barrels for the umarex notos?
- Thread starter daddypaddy
- Start date
I do not know about the gamo urban barrel but I followed the path described by genob in post #16 and after searching for some time, I was lacky and found a used 5.5mm tormenta barrel. It is 8 centimeters approximately longer than the notos barrel and with minimal effort and work, like genob explains in his post, I installed it and that gave me approximately 34 to 36 more FPS and it is as accurate as the notos barrel.
Upvote 0
I noticed this from an eBay seller that I am watching regarding a different item.
It is described as a kit that will adapt a 22cal FX barrel to fit the Notos
It might be worth a look for you Notos owners
Hope this helps
Edward
It is described as a kit that will adapt a 22cal FX barrel to fit the Notos
It might be worth a look for you Notos owners
Hope this helps
Edward
Umarex Notos FX Barrel Kit 500mm | eBay
FX barrel kit designed to fit the Notos. This will allow you to utilize the 500mm FX liner. 22cal which you will need to provide. No modification is needed and it is a simple swap. Spare orings and x1 m4 set screw will be included.
www.ebay.com
Upvote 0
Yes C88 machining sells this kit. You can order the FX liner from Utah Airguns. You can also find @ Firewalker ( a member here) that can install this kits for you if that's what you want. An alternative is using Turkish barrel available from Canada shooting Supply, this requires some fitting and machining thou.I noticed this from an eBay seller that I am watching regarding a different item.
It is described as a kit that will adapt a 22cal FX barrel to fit the Notos
It might be worth a look for you Notos owners
Hope this helps
Edward
Umarex Notos FX Barrel Kit 500mm | eBay
FX barrel kit designed to fit the Notos. This will allow you to utilize the 500mm FX liner. 22cal which you will need to provide. No modification is needed and it is a simple swap. Spare orings and x1 m4 set screw will be included.www.ebay.com
Upvote 0
I've tried few steel barrels, cut the shoulder back and fitted them to the Notos but nothing approaches the original Notos barrel except for the FX barrel kit from c88machining.
I've got the .25 FX kit installed and the 1:18 liner, it's killin it at 50 yards with 36gr slugs.
The downside is the expense. And you will need to port the gun in order to make use of any longer barrel.
I've got the .25 FX kit installed and the 1:18 liner, it's killin it at 50 yards with 36gr slugs.
The downside is the expense. And you will need to port the gun in order to make use of any longer barrel.
Upvote 0