At Long Last! Rapid Air Weapons HM1000x.25

[30cal]

Of course different scopes have different dimensions. This is the Falcon 5.5-25x50 ffp with UTG medium Max Strength QD rings:


You can see that it JUST clears but it works fine:


This is the AEON 8-32x50 with the same UTG rings. I have a set for each scope so they can be swapped at will.


It has about 1/8 inch clearance:


Now I like my scopes as low as possible so I work hard to find the best combination to achieve that.
I hope this info helps others decide which set works best for them.
Good luck!

 

[30cal]

Chasdicapua I just got the Chrony out and ran a test for shot count. Shooting the JSB kings at 940 fps on this cold 35 degree F day, I got 35-36 shots from 3,300 psi (230 bar) down to 2,200 psi (150 bar) on the regulator.

 

[Nutcracker]

"30cal"Nutcracker the height of the mag above the top of the Picatinny rail is .47 inch or 12 mm. As you can see it is offset to the left. It can get in the way of side focus knobs or wheels on some scopes:


Thanks , that is clear now.

 

[30cal]

Even though it's fuzzy HUH? LOL! Glad to help. Wish I would have had a photo like this when I was researching mine.

 

[Nutcracker]

"30cal"Even though it's fuzzy HUH? LOL! Glad to help. Wish I would have had a photo like this when I was researching mine.

Exactly, I did not mean your photo was not clear, I meant it was very easy to understand, and a photo is worth a 1000 words. I have a set of 30mm Weaver rings, called grand slam, they are .500 inch ( high), that would only give me 1mm or 1/32". They might be a lil to close, that is not counting if I have to put the turret saddle over the mag. But since I have em will try em. It get expensive buying rings trial & error.

Thanks, for answering our questions.

 

[30cal]

I was just kidding! ;-) Just makin a joke about my fuzzy photo.

 

[chasdicapua]

Thanks for the shot count info.

 

[jps2486]

You won the wood lottery.