Getting a rifle zeroed at any distance will allow you to use a ballistics calculator and dial to any distance. You will need a chronograph as the muzzle velocity and projectile weight will determine your dialing. The bc of the projectile can be determined if you can measure fps at different distances.A lot of it is hold and trigger control. Tune can help, so can adjusting the physical balance of the gun. My pistol shooting has improved vastly in the past 3-4yrs
As for distance, I'd say on average I most often fall somewhere around 30 yards. Pistols or rifles, doesn't matter.
At a high velocity, your aimpoint does not need to be changed all that much. A .25 projectile at 44ish grains going 890fps will hit a bullseye at 29yds, and again at 60yds.Voted 20-50 yards, but really shoot from 25 to 64 yards.
Are you shooting pellets or slugs, What kind. Currently have a gauntlet 30, and i am looking for a challenger pro10 to 125 yards depending on the gun. The Gauntlet 30 and Challenger Pro 30 are the ones that usually get stretched out.
Are you shooting pellets or slugs, What kind. Currently have a gauntlet 30, and i am looking for a challenger pro
thanks for the info I'll give them a tryI'm using these Griffin 64 grain slugs. They're one of the few slugs I've found that easily load into the breech, and the accuracy is spot on. I was getting pretty close to MOA at 110 yards a couple days ago.
Griffin Slugs .300 Caliber Dish Base HP 56- 60-64 grain 100 ct.
Air gun slugs, .30 cal. air gun slugs, Griffin airgun ammo, hunting slugs, air gun ammo, .30 cal match slugsgriffinairguns.com
The Challenger Pro is less picky when it comes to slugs but I use NSA 61 grain .303 sized for that one, at least most of the time.
If I could only keep 1 of those guns it would be a tough decision, but something about the way the Guantlet fires (trigger, recoil, sound etc) I find to be a more relaxing and satisfying experience. The Challenger Pro 30 has a bit more twang and pop... but does have a slight advantage in power and adjustable regulator, power wheel, etc.