I have been continued to test pellets in my new Avenge-X in .177. I have found some nice low power setting rounds. These shoot at the 0.50" at 50-yards level. I am not sure I can expect a lot more than that here. So now I am looking to find something that works on the "high" setting. Note I am not tweaking the rifle. While it is highly tweakable, indeed intended to be tweaked, I wanted to see how I could do with it as it came new from the box. As usual it goes into my video diary.
Avenge-X .177 PCP Pellet testing Round 3: 50-yards
Benjamin Match 10.5gr (Sorted)
JSB Monster Redesign 13.43 (862fps SD 3.68)
JSB Beast 16.2 (802fps SD 7.42)
Avenge-X Base Model Power Setting High
Vortex Crossfire II 6 to 18
Bald Eagle Front Res
tSinclair Bag RiderP
rotektor #13 Rear Bag
Custom Bag Rider
Air Pressure was kept 3000 psi or higher throughout.
The weather was 88-degrees Fahrenheit with about 80% humidity. There was a slight 0 to 5 mph wind. It varied in direction but was largely a cross wind.
The rifle is stock, and there are no tweaks to the gun. The bottle started the day at full capacity. I took a couple of shots to sight in the rifle. The shots all remained on the regulator. The rifle was kept with a total pressure of 3000 psi or higher. The regular remained about 1800 psi.
The best shooting was the JSB Monster Redesign 13.43 grains. The Benjamin performed OK but had some looping.

Avenge-X .177 PCP Pellet testing Round 3: 50-yards
Benjamin Match 10.5gr (Sorted)
JSB Monster Redesign 13.43 (862fps SD 3.68)
JSB Beast 16.2 (802fps SD 7.42)
Avenge-X Base Model Power Setting High
Vortex Crossfire II 6 to 18
Bald Eagle Front Res
tSinclair Bag RiderP
rotektor #13 Rear Bag
Custom Bag Rider
Air Pressure was kept 3000 psi or higher throughout.
The weather was 88-degrees Fahrenheit with about 80% humidity. There was a slight 0 to 5 mph wind. It varied in direction but was largely a cross wind.
The rifle is stock, and there are no tweaks to the gun. The bottle started the day at full capacity. I took a couple of shots to sight in the rifle. The shots all remained on the regulator. The rifle was kept with a total pressure of 3000 psi or higher. The regular remained about 1800 psi.
The best shooting was the JSB Monster Redesign 13.43 grains. The Benjamin performed OK but had some looping.
