Air Venturi Avenge X Barrel Shroud Slips

[JoeRJr]

The barrel shroud on my Avenge X slips forward as I shoot the gun. As it moves, my POI shifts. If I hold the barrel in place with painters tape the shroud stays put, and so does my POI. This isn't a permanent solution for me though. What can I do about this? There seems to be no way to tighten it unless I modify it.
Joe

 

[B_y_r_o_n]

Maybe this video will provide some help.

 

[inkjnky]

Mine did the same thing if you unscrew the shroud there is a set screw that was loose where the shroud meets the receiver.

 

[JoeRJr]

Maybe this video will provide some help.

Great Vid. Thanks!

 

[JoeRJr]

Mine did the same thing if you unscrew the shroud there is a set screw that was loose where the shroud meets the receiver.

That's exactly what it was. Easy fix. Thanks!

 

[inkjnky]

No problem sir glad to help.

 

[Evolve 3D]

Glad you figured it out! If you want something extra to clamp it down, we also have these available

 

[Nteesupreme1]

Mine did the same thing if you unscrew the shroud there is a set screw that was loose where the shroud meets the receiver.

I hope that works for me. It seems after 10 shots my poi goes far left. I uninstalled and reinstalled scope and mounts made sure everything was to torque spec. Removed the shroud added a shim to keep the baffles in a firm position. Cleaned the barrel lightly lube my slugs and after all that. It shot well the 1st 10 shots were great then everything went left, literally 2.5"-3" @75yds. I'll keep my fingers crossed.