On my avenger I've drilled out the barrel port and the transfer port and crowned the barrel. So what's next ive contemplated a plenum but don't like the looks. Was thinking of trying to replace lower air tube with a longer one if someone has an extra one laying around
Air Venturi Avenger .25
- Thread starter imtrigerhapy
- Start date
I've also purchased a heavy hammer spring and light valve spring but have not installed yet. After the mods I made was going for 25ish grain high pellet count per fill. I'm hoping with the springs it will allow me to have some luck with slugs. I haven't tried slugs yet but wanting to out to 100 and a lil more with some accuracy
Upvote 0
This is with 1/4 turn on hammer and 2200 psi all group a mag of 8 at 30 yards fell off reg at 40 reasonable accuracy to 70ish shots
Upvote 0
I have one that I bought from a friend that had lots of upgrades with port mod , hill hammer system with an internal huma. The max speed was 872 with the rest waisted. The huma spacer is enough plenum for a speed of 855 with the 25s and is a very sweet gun. You are only going to get so many shots at that power (two mags). If you got lucky like it looks like you got a good barrel and already have a gun that does what it does well. 42 Ish ft Lb. Check out about the lawyer spring and polish parts but don't dump money into it.
Upvote 0