Air Venturi Avenger Bullpup. A Cluster Funk.

[KBURG]

So after the great experience of buying the Avenge x Tactical, I got a great deal on the last stock of the Avenger Bullpup.

It arrived on Saturday and I used it on Sunday - beautifull out the box. Except for the probe rear o-ring that was messed up. So I thought, let me just replace it. I mean I stripped the Avenge X - so how hard can it be? It was a nightmare of threadlocked screws and stripped threads. Long story short, now I need to replace some parts. I tried Utah/AirgunDepot/Pyramid etc. Air Venturi don't bother answering so your help is appreciated.

• PS-010-W-01
• 000P2-060-W-01
• 000P2-061-W-01

 

[Ezana4CE]

@KBURG When I had questions I was able to get a response form Air Venturi via email. If you have not tried emailing them, maybe give it a shot. Aside from that I have no other advice. I hope your rifle isn't out of commission too long.

 

[KBURG]

@KBURG When I had questions I was able to get a response form Air Venturi via email. If you have not tried emailing them, maybe give it a shot. Aside from that I have no other advice. I hope your rifle isn't out of commission too long.

Thanks, I did. Took a few days but I got an answer. I genuinely thought the Avenger would be as easy to dissasemble as the X. Now I know !

 

[Arby186]

In case you ever need to contact them again, I seem to have success reaching someone over the phone. Email could be hit or miss

 

[Trucker3573]

Look up a few threads to find the other avenger leak thread a pm tpatner. That stinks and even though you needed to take nothing apart to change a probe oring at least you found this all out right out of the gate and it will come apart easier next time.