Air Venturi Avenger fill issue

[LONESTAR .25]

Hey folks,
Attempted to fill my .25 today and 30 seconds in the connection from fill foster shot out. Sometimes those are a bugger to get set! Anyway , connected everything back and gun is not filling. My compressor needle not moving and nothing comes out once I release the relief valve from my El3.
I checked hoses and all connections plugged main line and it builds pressure.i than filled my Urgan2 no problem.
Any suggestions?
Thanks,
Gary

 

[dizzums]

if its all the way empty, cock it and try it ..if still nothing ram '2' pellets into it then try it .. dont forget to ram-rod them out before use ..

 

[WorriedMan]

Sounds like plugged fill port from the start. Try few drops of heavy weight silicone oil in fill port overnight. Drain any air from reservoir and remove/dismantle fill port if oil soak didn't help, likely debris or corrosion causing problem. WM

 

[LONESTAR .25]

Thanks guys, I'll dig into it tomorrow

 

[LONESTAR .25]

Worried man it worked.
Thanks much!