After shooting my avenger, I filled it up with air and set it down. All of a sudden POP and then it leaked all the air out. Does anyone know what this could be and is it something I can fix or will I have to send it to someone. This is an older avenger model.
Air Venturi Avenger made a loud pop and leaked all the air.
- Thread starter 124nut
- Start date
I don't have any suggestions, but it made me think. If I had just hand pumped it up, I'd be pissed if all the air leaked out. Lol
Upvote 0
If it popped and then began leaking down, more than likely the burst disc went. This happens sometimes, pretty easy to swap out. Just make sure if there's any debris in that area, that you clean it out.
www.pyramydair.com
Avenge-X 6K Safety Valve | Pyramyd AIR
We've got a great price on Avenge-X 6K Safety Valve at Pyramyd AIR. Shop where the experts do!
www.pyramydair.com Upvote 0
That happened to one of my guys a week or two back. Pull the trigger, the gun shoots, but also empties all of its air.
The o-ring at the back if the air cylinder turned out to be the bad guy in my case. A simple fix .
Mike
The o-ring at the back if the air cylinder turned out to be the bad guy in my case. A simple fix .
Mike
Upvote 0
This gives me a place to start. I ordered a burst disc and will start there. Thanks to everyone that responded.
Upvote 0
Well the new burst disc came and I put it in today. Filled it with air and no leaks so far so thats what it was. Just going to leave it sit overnight to make sure she doesn't leak. Thanks to all of you. Gary
Upvote 0
Is this a common issue with the avenger? Im looking into my first pcp and these leaks seem to be a common question.
Upvote 0
Every pcp made will leak at some point no matter the price point. Learning how to get inside the guns to change orings is part of the hobby.
Upvote 0