I recently bought my first PCP rifle and this is a whole new world for me. I bought the Barra 1100z and a basic Barra scope, H2O 4x32 BDC, and I am not sure what mount I need to purchase to mount the scope. I can’t find anything on the Barra website. Thanks for your help with this newbie issue.
Barra 1100z scope mount
- Thread starter papparonzi
- Start date
It's either Picatinny/Weaver rails or Dovetail for your scope rings. You don't give any relevant info. It would help (picture? )
Ring height (low, medium, high) is your preference (what'smostcomfortable? ). Does your scope have a 1" tube or 30mm or 34mm? Info!
BTW, welcome, GREAT place here for knowledge & aid. Especially for the newly initiated. Enjoy.
Ring height (low, medium, high) is your preference (what'smostcomfortable? ). Does your scope have a 1" tube or 30mm or 34mm? Info!
BTW, welcome, GREAT place here for knowledge & aid. Especially for the newly initiated. Enjoy.
Upvote 0
@papparonzi Looks like a picatinny rail, but it would help to know which scope you bought. The tube size will let you know which size rings you need (likely 1” or 30mm).
The 1100z .22 Gen 1 - Black
The 1100z is our first Pre-Charged Pneumatic (PCP) air rifle, expertly engineered for the serious shooter. Built with premium components, it delivers exceptional performance and accuracy straight out of the box. Loaded with customizable features, the 1100z makes personalization effortless...
barraairguns.com According to the scope specs you need a pair of 1” rings or a 1” cantilever mount.
H30 4x32 Illuminated BDC Rifle Scope
OPERATION The H30 4X32 features an adjustable objective and an illuminated BDC reticle. The variable powered red LED illumination system is intuitive to set to the right level for your situation. The adjustable objective maximizes image brightness and contrast in low light conditions. Clearly...
barraairguns.com
Upvote 0
Ive got the 1100z as well. Ive got 1" 20 mm medium height rings on my 40mm scope. 1" Low rings will probably fit your 32mm scope.
The stock cheek rest is adjustable so you can adjust it up if you order the medium rings.
My gun seems to like the jsb 13.43 rs pellets. I've tried half a dozen others even the 18.1 and they don't shoot well from my gun.
It will shoot nickel-size groups at 50 yards on a good day with 13.43 .
The 1100z has made an awfully lot of headshots on squirrels the last 2 months of squirrel season!!
good luck!
The stock cheek rest is adjustable so you can adjust it up if you order the medium rings.
My gun seems to like the jsb 13.43 rs pellets. I've tried half a dozen others even the 18.1 and they don't shoot well from my gun.
It will shoot nickel-size groups at 50 yards on a good day with 13.43 .
The 1100z has made an awfully lot of headshots on squirrels the last 2 months of squirrel season!!
good luck!
Upvote 0
Would anyone know where the breach o - ring is located in the Barra 1100z? I've taken the barrel off of mine trying to oil the breach o - ring thinking it was where you'd load a pellet and see no breach o - ring. Anyone know where the breach o - ring is. Barra added a extra breach o - ring but gives no instructions on how to oil or replace if need be. If anyone can help I'd greatly appreciate it.
Upvote 0
Never mind on the breach o ring with the Barra 1100z guy's. The breach o ring for the Barra 1100z gen 1 is much deeper into the barrel breach than the gen 2. The 1100z gen 2 the breach o ring you can change without removing the barrel. But with the 1100z gen 1 you must remove the barrel to get to the breach o ring beings the gen 1 breach o ring is probably a little less than 1/2 inch deep into the barrel breach. I hope this helps anyone that may need this information later down the road.
Upvote 0