I would appreciate knowing the barrel twist rate & (L or R) of Wolverine barrels, mine was made in Dec 2018 If it makes any difference
Thank you
Thank you
Last edited:
Daystate Barrel Twist Rate Wolverine HP-R .22?
- Thread starter oledawg
- Start date
I emailed Daystate Technical support. They forwarded my questions to AoA.
Their official response is below.
All HP .22 and .25 Wolverine barrels are polygonal rifling.
The .22 HP is 1:18 twist rate.
The .25 HP barrel is 1:30 twist rate.
The threading on the muzzle end of the HP barrels is M14x1 (bare barrel- under the shroud)
The o-ring size on the shroud carrier is an 017 or 17.17mm ID x 1.78mm CS
Their official response is below.
All HP .22 and .25 Wolverine barrels are polygonal rifling.
The .22 HP is 1:18 twist rate.
The .25 HP barrel is 1:30 twist rate.
The threading on the muzzle end of the HP barrels is M14x1 (bare barrel- under the shroud)
The o-ring size on the shroud carrier is an 017 or 17.17mm ID x 1.78mm CS
Upvote 0
Thanks for going to all that work. I should have removed this question once I traded the Wolverine for the Red Wolf. Now there is this great info I will leave it up for others who might me interested.
Upvote 0