Neither of these are my idea, but both will work great for loading the P17 or any of the pellet guns that are hard to position the pellet for loading. The one showing the .22 rimfire is from an American Rifleman many years ago, but it works just fine for pellets. Don't remember who made the loader out of plastic.
Beeman P17 loading tool
- Thread starter Jonah
- Start date
Neither of these are my idea, but both will work great for loading the P17 or any of the pellet guns that are hard to position the pellet for loading. The one showing the .22 rimfire is from an American Rifleman many years ago, but it works just fine for pellets. Don't remember who made the loader out of plastic.
Good idea! Especially if you have fat fingers like me. I have a P3 and a P17 and they are a tight fit for finger and pellet in a small crack. Round nose pellets are a lot easier to load than the flat wad cutters in these guns.
The plastic milk jug material looks promising. I will try it. Thanks for the post. MM
The plastic milk jug material looks promising. I will try it. Thanks for the post. MM
Upvote 0
Check down nine topics to "Beeman P17" This set up works very easy after modification it is a straight shot into the barrel with pellet pen.
Upvote 0
