New in box Christmas present. Went to pick it up and barrel swivels out of line with air chamber. Any ideas on how to accurately re-align it?
Beeman Beeman Raider .25 loose barrel
- Thread starter tedium27
- Start date
Try loosening the barrel band and see if it lines back up straight. Then tighten it back up tighter than it was originally. I had to do this for the one I owned for 2.5 hours before taking it back to the store for a refund because of other issues.
Upvote 0
I have 2 Raiders.
The barrel is just inserted in the synthetic receiver and actually held in place by a pin (not screw).
The 2 barrel bands will keep the barrel and air tube tight together.
The receiver and air tube are also kept tight together by 2 screws.
Loosen the 2 barrel bands and rotate the barrel in the proper position then tighten the barrel bands.
The barrel is just inserted in the synthetic receiver and actually held in place by a pin (not screw).
The 2 barrel bands will keep the barrel and air tube tight together.
The receiver and air tube are also kept tight together by 2 screws.
Loosen the 2 barrel bands and rotate the barrel in the proper position then tighten the barrel bands.
Last edited:
Upvote 0
Short version of the story is it ran out of adjustment on both open sights and scope before being sighted in. Maxed out was still roughly an inch off to the right. But it was still a good group tho.
Upvote 0