Beeman Beeman Raider

[Kingrs2]

Still holding air overnite. Thats a good thing. The shroud is a plastic material but it will be changed to carbon fiber. It has a baffle in the end of it to help quiet it down. I still can not get the shroud off after the baffle insert. The baffle insert screws onto the barrel - which has a nice crown - but after that the shroud will not budge. Still trying to see how it will come off short of a dremel. Very nice light rifle if I can get the FPS up a bit.

View attachment 439310

 

[Kingrs2]

Still holding air overnite. Thats a good thing. The shroud is a plastic material but it will be changed to carbon fiber. It has a baffle in the end of it to help quiet it down. I still can not get the shroud off after the baffle insert. The baffle insert screws onto the barrel - which has a nice crown - but after that the shroud will not budge. Still trying to see how it will come off short of a dremel. Very nice light rifle if I can get the FPS up a bit.

View attachment 439310

How you remove that I get it's. Allen Wrench what size cause I would like to get a aftermarket one

 

[rdpjr6504]

I will check when I get home. I think 5 or 6 mm but not sure.

 

[Kingrs2]

I will check when I get home. I think 5 or 6 mm but not sure.

I actually got it figured out just new to Air rifles let a lone suppressors and comes to Suppressor what am I supposed to look for like size I get 25cal but their was two options and I know it's a threaded barrel so when picking I get a little confused on what I need for the correct size my dumb dumb would mess up lol

 

[Jess4321]

The picture of the raider with the DonnyFL sumo on it! Have you

I just picked up the .25 cal kit W/Pump from my local Big 5 Sporting Goods. Just starting the sight in, break in period. Pretty tight have to really cycle the bolt to get trigger to set. I think it will soften only 3 mags through so far.

View attachment 485844

have you noticed any improvement with the DonnyFL sumo on it ? I’m thinking about getting the DonnyFL koi but don’t know if I should just spend the extra money and get the sumo

 

[Alexcoyt]

Looks good. Glad it worked out for you. I put my .22 back together tonite. Made a carbon fiber shroud and used original mod. Not too loud sounds good to me. I have the BARRA 1100Z breeches on all 3 of my raiders they work great. I think the plastic breech and pin to hold barrel are only 2 things really need changing. The inners are like the QB78 with the block behind valve not flush to valve so I installed a 3/8 washer and it tightened the gap. Tried to chrony but my chrony was dead. Could not get it to work but acuracy was good at 25 yards. Will order a new chrony and get this one and .177 and .25 up and running the way they should. If you need any further info just ask.

View attachment 519497

View attachment 519498

View attachment 519499

View attachment 519500

New to the pcp rifles how complicated is it to add a barra 1100z side lever breech to a beeman raider?