Benjamin Akela @ 50 yards.

Jump to latest Follow Reply
G

Guest

Guest
She has a few hundred pellets through her now and two barrel cleanings. When I first received her I drilled out the air stripper for more flow... loc-tited the barrel/rail screws, and shroud mount.



Ran her across the chronograph and set the power adjuster to around 3/4. Which avg. 896fps with 18.13g JSB across two mags from a 3000psi. Fill. Down to 2500psi.



Taken her to the gun range a few times... And she easily shoots under an inch @ 50 yards. Probably can do better without ear protection , eye protection, and a face mask!



All groups shown are 5 shot groups @ 50 yards with 18.13 JSB.
20201026_160632.1603754942.jpg
20201026_132845.1603754943.jpg
20201026_132842.1603754943.jpg
20201026_132838.1603754944.jpg
20201026_132835.1603754945.jpg
20201026_132832.1603754946.jpg

 
Thanks GUYS!! Leo I have tried some 14.3 premiers but only @ 10 yards... They are doing 960fps on the current power setting, so I will probably turn down the power to shoot those in the 800's.

To everyone wondering how loud it is... Being a Marauder owner, they are very close... The impact of the pellet hitting the target is louder than the gun.



Troy do you know if the outer barrel o-rings are the same size as the Kral? I already got some upgraded breech o-rings from Tim at Mac-1... But I wanna have spare O-rings for everything!
 
Upvote 0


Troy do you know if the outer barrel o-rings are the same size as the Kral? I already got some upgraded breech o-rings from Tim at Mac-1... But I wanna have spare O-rings for everything!
Click to expand...

They are the same as the Kral barrel orings.



Thanks!! Good to know... Just placed an order on ebay for a full O-ring kit for a Kral Puncher! Lol, since Crosman wont have a parts diagram or parts available for a year being a new gun. ( already called them)
Click to expand...


 
Upvote 0
Awesome! I just purchased one and only had it a few days and had to send it back as the "floating" barrel was not floating but quite aggressively resting on the tank strap. Pyramid Air was awesome at getting an RMA and replacement on its way. 

As far as cleaning the barrel, what's the best way to go about that, remove shroud and barrel, just the shroud, or what? I'm familiar with firearms but not PCPs. Is the barrel screw the one just at the bottom of the shroud? 

I can't wait to shoot it outside, i was able to do about 20yrds in my basement and it was a tac driver.!
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu