I had these professionally machined and heat treated after bending and breaking a couple that are made and sold by other sources. Made from tool steel and machined to factory spec sizes of nut and stem. No more bent or broken tool.
One end is square and hollow to remove the nut. The other end is threaded for pulling the exhaust valve body on older Benjamins and Sheridan's. This tool is needed to access the valve on all the Benjamin airguns made in St. Louis, all the Benjamin, Benjamin/Sheridan, and Sheridan airguns made in Wisconsin. It is only needed on some made in New York during the 1st year that they were made in NY. If you are not sure if you need this tool, start to disassemble the gun and look in the back of the compression tube, If you see the square hole in the center of the nut, you need this tool. If you plan on or want to reseal these guns and do not have these tool, there is no other way to do it.
50.00 paypal F&F shipped
tim
![IMG_1721[1].JPG](https://www.airgunnation.com/attachments/img_1721-1-jpg.427892/ "IMG_1721[1].JPG")
![IMG_E1727[1].JPG](https://www.airgunnation.com/attachments/img_e1727-1-jpg.427893/ "IMG_E1727[1].JPG")
![IMG_1728[1].JPG](https://www.airgunnation.com/attachments/img_1728-1-jpg.427895/ "IMG_1728[1].JPG")
![IMG_1724[1].JPG](https://www.airgunnation.com/attachments/img_1724-1-jpg.427896/ "IMG_1724[1].JPG")
One end is square and hollow to remove the nut. The other end is threaded for pulling the exhaust valve body on older Benjamins and Sheridan's. This tool is needed to access the valve on all the Benjamin airguns made in St. Louis, all the Benjamin, Benjamin/Sheridan, and Sheridan airguns made in Wisconsin. It is only needed on some made in New York during the 1st year that they were made in NY. If you are not sure if you need this tool, start to disassemble the gun and look in the back of the compression tube, If you see the square hole in the center of the nut, you need this tool. If you plan on or want to reseal these guns and do not have these tool, there is no other way to do it.
50.00 paypal F&F shipped
tim
Last edited:
