Benjamin Bulldog Power Upgrade?

[Kinetic45]

I'd also like to mention that the Pitbull in the picture in a post above showing my DIY camo job ISN'T a Pitbull anymore....

last year Brian converted it to a full Taurus w/ all the mods in the short rail version and it is more powerful based on real world chronograph before and after testing. He did have to rework the chamber as it was out of spec

My groups tightened up some too with the tensioned barrel (and better chamber?). As I've mentioned, the heaviest bullets I shoot are the 150gr for deer n hogs and use the 130gr for almost everything else.

 

[dasman]

Any pics of your Taurus?

 

[Kinetic45]

I just took this one for you

Ive never repainted it with the camo as you can see, just shoot it as is. sorry the pictures a bit dark, thats the best light in my bedroom

 

[dasman]

And some don't like the looks! Thx for the pic!

 

[Kinetic45]

FYI Brian has also got a prototype .45 Taurus he's working on and hopes to be finished testing in a month or so.

 

[mackeral5]

FYI Brian has also got a prototype .45 Taurus he's working on and hopes to be finished testing in a month or so.

I am glad to hear things are progressing with the .45.

 

[tradecraft6f]

Although I decided to go with the Pitbull company re-worked Bulldog instead of doing it myself as I did not have the time, at the time. I went with the Mega version but If I had it to do over I would get the longer tubed 'Unleashed' version' They did good work and quick too, 11 days as they promised https://www.pitbullairguns.com/

And here is a link to a thread where you can learn about DIY the Bulldog upgrade to a Pitbull (sort of)

https://www.gatewaytoairguns.org/GTA/index.php?topic=148299.0

Here's the Pitbull Mega with my DIY camo job

View attachment 66218

11 days,hmm, im hoping mine will come back soon,Matt originally told me around 2 weeks or so,this was a few days before June 11th..

 

[bthurman]

Newest version of Taurus. The BP(bullpup) the br ( bemchrest.

 

[bearair]

Sweet looking rigs. Is that a custom picatinny rail on the second rifle?

 

[bthurman]

The rails are from fx kit 20310. I made custom rail under to join the 2 and maintain alignment. then mounted directly to receiver and bb for support very solid and accurate setup.

 

[msouth12368]

Newest version of Taurus. The BP(bullpup) the br ( bemchrest.
View attachment 478005View attachment 478006
View attachment 478007View attachment 478008View attachment 478009

That stock on the Taurus BP! How hard would it be to install on the Bulldozer? Looks like the cheek weld and eye relief are improved.

 

[herbjones419]

Purchase 3 factory front barrel supports. Cut off the muzzle end of support /remove the flat in the support diameter and shape to the diameter of the barrel. Use 3 at equal distant points on the barrel and use the front barrel support. The bulldog barrel Outer Diameter has a slight taper to it. I have opened the diameters in supports to match specific points on the barrel. This way when you slide the shroud back the supports will not go back past there diameter on the barrel so you can pick exactly where you want them to sit. I suggest using the factory supports as I have found they are the best at maintaining proper barrel aligment and you can precisly fit the location.

View attachment 66213

Wow this must be a newer model. As far as I know the original model didn’t have those supports and pit bull air guns made them 1st. I could be wrong but pretty sure.