Where's the cheapest place to get a marauder .25 shroud and barrel and breech plan on converting my marauder .22 to .25 gonna mod the stock .22 valve by taking out the end cap and return spring and putting in a 18lb heavy hammer spring also is a 50 grain noe mold too heavy for a marauder .25??
Benjamin Benjamin marauder .22 converted to .25
- Thread starter anonymous_.457
- Start date
I have marauder .25 gen 2 with zero mods. No tuning except for hammer spring tension. And throw adjustment. I get about 16 shots per fill starting at right around 900 fps, and ending in the mid 850s, unregulated. Using 25gr. Pellets. Can you use 50gr...sure. depends on what you goal is with regard to fps, and shots per fill if it will work for you. Fwiw with my current set up at 30yards I can put all 16 shots in one small ragged hole with very little effort.
Upvote 0
You should be able to call crosman and get parts the cheapest. You can get on the website and compare parts diagrams and see what you need. Just call them with part #s to order.
Also another thing to think about, not sure what he has left. Rich at Airgun revisions had Refurbished marauders starting at like $250 bucks or something crazy. I’m pretty sure he sold them all though. He might have some $350 armadas left in .25
Also another thing to think about, not sure what he has left. Rich at Airgun revisions had Refurbished marauders starting at like $250 bucks or something crazy. I’m pretty sure he sold them all though. He might have some $350 armadas left in .25
Upvote 0
Well the reason I'm doing this is because my buddy wants to give me his marauder .22 for free but I was wanting to get a .25 marauder
Upvote 0
Ok so the noe 50 grain slug mold will probably work good with the stock valve modded and 18 lb heavy hammer spring and the big transfer port from hill airguns
Upvote 0
Will be interested in your results. I have never shot slugs with this, so don't have info on how they will perform.
Upvote 0
I have about 30 different guns being delivered from Benjamin today from Bulldogs to Reximex guns for refurbishing.
Upvote 0
Everything for the 25 caliber top end is different except for the shroud itself.
So you’re going to need a whole top pretty much. Parting this thing together is not a way to go if you want to save money and headache. I do have a complete used top here. I don’t do business over social media platforms so it’s best to call or email.
Upvote 0
