Benjamin Benjamin marauder 25 caliber factory settings

[Cbourbeau32]

Hello, I bought a new marauder 25 caliber earlier this year and before I started adjusting it I didn't write down the factory settings on the:

Hammer spring adjustment
Striker adjustment
Velocity adjustment screw setting

Does anyone know what those settings are from the factory?

Thank you!

 

[3Crows]

 

[Cbourbeau32]

Good morning and I appreciate your reply! I assume these settings mean:

Hammer tension: five turns out from zero added tension

Hammer stroke: striker four turns out from flat against hammer

Transfer screw: four turns open from all the way in (closed)

 

[3Crows]

I think it means:

HT - 5 turns clockwise inward from minimum tension
HS - 5 turns clockwise from striker fully retracted flush to hammer
TS - 5 turns CCW from fully closed

 

[Cbourbeau32]

I think it means:

HT - 5 turns clockwise inward from minimum tension
HS - 5 turns clockwise from striker fully retracted flush to hammer
TS - 5 turns CCW from fully closed

Thank you!!