This P-rod shoots lights out. Also includes (4) magazines.
It is tuned down to 612 fps avg for 32 shots per fill with JSB 15.89’s for barn pesting. Has the Hill Matched Pistol Parts Kit installed ($135 value), stock hammer with the Hill Peek delrin striker. Shot string below is from 3000psi to 2000psi and then starts dropping off due to the light tune and heavier Hill valve spring, which also prevents hammer bounce for better air efficiency. Still has three turns left on the hammer spring for more power. Consistently getting four mags per fill with a 19fps spread with this tune. Kills squirrels, no problem with good shot placement, which is very easy to do with this little tack driver. I also have the Crosman skeleton stock.
New Prices:
Gun $369
(3) extra magazines, $45 (4) total
Hill Matched Pistol Parts Kit $135
Peek striker $23
UTG pic/sling stud rail. $15
Bushnell Trophy Red Dot $100
DonnyFL M14 X 1.25 adapter custom threaded by my gunsmith ($75 labor) to accommodate the affixed AGT small moderator. ($100) .290 exit bore diameter.
*Original shroud end cap and short 1/2X20 adapter will be included.
*Over $900 invested, plus shipping!
The barrel band has been tapped with 10/32 machine threads and a machine threaded sling stud installed through the existing fore-end mounting hole and into the barrel band for more support. No extra holes drilled in the fore end. The front pic adapter is supported by the sling stud, not the plastic for-end.
Holds air indefinitely and is a tack driver with the JSB 15.89 pellets. Target pictures below are two, full magazine (8 shot) groups with current tune described above and in the chrony pic below. Very consistent accuracy and fps for a non-regulated pistol. Groups were shot at 50yds using 4-16x44 glass. Shoots CPD 14.3’s excellent also.
$450 for gun with affixed moderator and red dot. Due to new classifieds rules, moderator must be purchased as part of this package, as I would not be able to sell it separately. This thing is literally mouse fart quiet with the mod.
$400 minus the red dot/rings.
*Original box & papers from Crosman.*
*Crosman test card dated 2/14/23.
*Original valve cap, valve spring, hammer spring, steel striker and gauge block are included if you wanted to put it back to stock, although I don’t know why anyone would.
*Hill light hammer ($48.98) also included should you in the future choose a regulated application.
*Short 1/2x20 adapter and factory shroud end cap are also included.
I’m taking a huge hit on this so prices are firm and include free shipping to the lower 48.
If you choose to take the red dot, it will be sighted in at 20yds, and ready to shoot out of the box. I’ll even throw in what I have left of the JSB 15.89’s (2/3 500ct tin)
***See Bushnell trophy red dot sight specs in the pictures below. Will not sell the red dot sight before the gun sells.***
If you want it tuned higher, I can do that before I ship it. But realize that the shot count will be less. I will provide a full-fill shot string & target groups, using the red dot at 20yds to the buyer if he/she chooses a higher powered tune.
PP FF, Cashier’s check from bank or
USPS MO
Thanks for looking and bearing with my rambling! I feel the buyer is entitled to as much information as to make an informed purchase.
Check my feedback. Buy with confidence!
^Two shots did not read.^
^Breeze picked up for the last three on the top group.
^Minus the one flier. That one was on me^
It is tuned down to 612 fps avg for 32 shots per fill with JSB 15.89’s for barn pesting. Has the Hill Matched Pistol Parts Kit installed ($135 value), stock hammer with the Hill Peek delrin striker. Shot string below is from 3000psi to 2000psi and then starts dropping off due to the light tune and heavier Hill valve spring, which also prevents hammer bounce for better air efficiency. Still has three turns left on the hammer spring for more power. Consistently getting four mags per fill with a 19fps spread with this tune. Kills squirrels, no problem with good shot placement, which is very easy to do with this little tack driver. I also have the Crosman skeleton stock.
New Prices:
Gun $369
(3) extra magazines, $45 (4) total
Hill Matched Pistol Parts Kit $135
Peek striker $23
UTG pic/sling stud rail. $15
Bushnell Trophy Red Dot $100
DonnyFL M14 X 1.25 adapter custom threaded by my gunsmith ($75 labor) to accommodate the affixed AGT small moderator. ($100) .290 exit bore diameter.
*Original shroud end cap and short 1/2X20 adapter will be included.
*Over $900 invested, plus shipping!
The barrel band has been tapped with 10/32 machine threads and a machine threaded sling stud installed through the existing fore-end mounting hole and into the barrel band for more support. No extra holes drilled in the fore end. The front pic adapter is supported by the sling stud, not the plastic for-end.
Holds air indefinitely and is a tack driver with the JSB 15.89 pellets. Target pictures below are two, full magazine (8 shot) groups with current tune described above and in the chrony pic below. Very consistent accuracy and fps for a non-regulated pistol. Groups were shot at 50yds using 4-16x44 glass. Shoots CPD 14.3’s excellent also.
$450 for gun with affixed moderator and red dot. Due to new classifieds rules, moderator must be purchased as part of this package, as I would not be able to sell it separately. This thing is literally mouse fart quiet with the mod.
$400 minus the red dot/rings.
*Original box & papers from Crosman.*
*Crosman test card dated 2/14/23.
*Original valve cap, valve spring, hammer spring, steel striker and gauge block are included if you wanted to put it back to stock, although I don’t know why anyone would.
*Hill light hammer ($48.98) also included should you in the future choose a regulated application.
*Short 1/2x20 adapter and factory shroud end cap are also included.
I’m taking a huge hit on this so prices are firm and include free shipping to the lower 48.
If you choose to take the red dot, it will be sighted in at 20yds, and ready to shoot out of the box. I’ll even throw in what I have left of the JSB 15.89’s (2/3 500ct tin)
***See Bushnell trophy red dot sight specs in the pictures below. Will not sell the red dot sight before the gun sells.***
If you want it tuned higher, I can do that before I ship it. But realize that the shot count will be less. I will provide a full-fill shot string & target groups, using the red dot at 20yds to the buyer if he/she chooses a higher powered tune.
PP FF, Cashier’s check from bank or
USPS MO
Thanks for looking and bearing with my rambling! I feel the buyer is entitled to as much information as to make an informed purchase.
Check my feedback. Buy with confidence!
^Two shots did not read.^
^Breeze picked up for the last three on the top group.
^Minus the one flier. That one was on me^
Last edited: