FX Best place to send Fx for repairs/reseal

[wickedwoods]

Hello, I have a fx dreamline power pup, it's about 3 years old, it's developed a slow leak, I believe one of the regulator gauges Isent correct and I also have a heavier hammer I would like installed...best recommend place to send my rifle in for the work?

 

[Ed24]

The dream pup is not that difficult to work on. There are plenty of videos on how to reseal, just need to order your O rings. If working on it yourself is not your thing then I would reach out to some of the retailers and see if they will. Utah, SPAW and Talon Tunes are just a few. Good luck!

 

[Clifton]

Utah Airguns is the FX service center or https://fxairguns.com/, then "support" for diagrams if you choose to DIY.

 

[Spartan]

Most FX airguns have a 3 year warranty these days. You said yours is "about" 3 years old. Check with your dealer to see if the repair/reseal can be covered under warranty.

I used that in the past and it was super easy. Free shipping too. BUT... that was through FX USA which no longer exists. But I don't see why Utah wouldn't perform the same warranty work now that they are supposedly the "new" FX USA.

 

[Jay308]

Custom FX Airgun Tuning and Repairs

We specialize in custom airgun tuning and general repairs for FX Airguns. If you want your FX Airgun tuned for more power or specific ammo we can do that. For all your FX Airgun tuning needs please reach out to us so we can get your FX Airgun tuned and shooting they way you want.

www.capefearairguns.com

 

[Rocko]

Sounds like a good time to break out the tools and dive right in.

 

[Ydunn.223]

Sounds like a good time to break out the tools and dive right in.

Yep just watch 1 or 2 Youtube videos and go in there and tack care of it " You got it you can do this "

 

[Trucker3573]

If it is in fact under warranty you probably will want to send it to utah airguns as I don’t believe cape fear is a warranty center. However you might want to call him to verify wether he is or isn’t a warranty service provider. If it isn’t warranty work with you being located in NY then cape fear airguns is without a doubt your best bet.

 

[Tack Driver]

Hello, I have a fx dreamline power pup, it's about 3 years old, it's developed a slow leak, I believe one of the regulator gauges Isent correct and I also have a heavier hammer I would like installed...best recommend place to send my rifle in for the work?

If you are in or near Arizona, you can take it to Airguns & Optics in Mesa. They are the Arizona FX dealer.

 

[monstr2]

Terrible gun!

 

[Bud-sc]

If it is in fact under warranty you probably will want to send it to utah airguns as I don’t believe cape fear is a warranty center. However you might want to call him to verify wether he is or isn’t a warranty service provider. If it isn’t warranty work with you being located in NY then cape fear airguns is without a doubt your best bet.

He is....he did a GREAT job on my DRS and Crown mk2...both had issues...

 

[wickedwoods]

Terrible gun!

Why do you say?

 

[monstr2]

Why do you say?

The valve pin in my Dream tac has broken for the fourth time the part is under warranty but Bagnall & Kirkwood is not interested in providing a replacement.

 

[wickedwoods]

The valve pin in my Dream tac has broken for the fourth time the part is under warranty but Bagnall & Kirkwood is not interested in providing a replacement.

So call utahair and spend 10 bucks on the upgraded one that uses steel instead of the blue plastic

 

[rodm1]

Your work bench.

 

[monstr2]

So call utahair and spend 10 bucks on the upgraded one that uses steel instead of the blue plastic

So call utahair and spend 10 bucks on the upgraded one that uses steel instead of the blue plastic

The valve pin broke off at the

So call utahair and spend 10 bucks on the upgraded one that uses steel instead of the blue plastic

The valve rod broke in two nothing to do with the poppet.