BLACK FRIDAY on NEW product!!!

Jump to latest Follow Reply
KrafordAndLypt

KrafordAndLypt

Member
Manufacturer
May 26, 2022
118
189
Washington, United States

Introducing the L-tech Loading System.​

rear block kls-integrated v55.png
krafordandlypt.com

L-tech Probe System

Experience a whole new suite of features with the L-tech Probe System! Boasting increased transfer port volume, improved air flow efficiency, a stronger loading probe, easier mag loading and precision repeatability, this system is sure to get the most out of your pellets and slugs. Get ready for...
krafordandlypt.com

Rare opportunity to get $150 off this new technology! Only active until 11:59pm Tomorrow.

Learn more about the L-tech Probe System on the product page.

There is also 35% off our brass Mlok weights!

front and back.png
krafordandlypt.com

3.8oz Brass Weights

Brass weights are a perfect way to shift the balance of your rifle forwards and or to weigh your rifle down for more stability. Comes in kits of 2 Machined Brass Each weight is 3.8oz Comes with Magpul Mlok hardware Designed and manufactured in Seattle, USA from domestically sourced brass
krafordandlypt.com
 
  • Like
Reactions: darylm, UtahPewPew, Mrshosted and 1 other person
Ezana4CE said:
This works for swagging slugs?
Click to expand...
It's a retracting probe system and butt stock carrier for the FX Impact. Clever design, in that it loads the ammo perfectly concentric like a pellet probe and then once it chambers the ammo, it retracts back so there is ZERO transfer port restriction.

Having made numerous slug probes, it's just about impossible to get them to load ammo perfectly square every time (equally impossible for them to rival the efficiency of a completely unrestricted transfer port).
 
  • Like
  • Haha
Reactions: KrafordAndLypt and Ezana4CE
Upvote 0
M0ist0ne said:
Heck yeah--pretty decent fps gains in testing?
Click to expand...
Testing has shown efficiency gains, due to all the valuables in barrels, projectiles, hammers, hammer springs and so on its hard to make an across the board statement. While there are power gains, the geometry and how the probe seats projectiles is extremely beneficial to accuracy.
 
Upvote 0
Who_needs_powder said:
Is that a flip down bag-rider I'm seeing?
If so, this seems like a good deal in that... between the cost of the butt plate and the bag-rider your not spending much for the probe technology.
Click to expand...
You can adjust the angle of the bag rider to your liking. Depending on what you are shooting this is a very useful feature.
Integrating everything allows us to save some costs and make a all in one package. Integrating all the parts also creates a more solid rifle as well. We couldn't pass up the opportunity to design everything together.
Side note, for those who do not want a bag rider, it is completely detachable via 2 M5 socket head screws.
 
Upvote 0
Impact701 said:
Is it possible to post the video here for those of us that don't have an Instagram account? Thanks Brian
Click to expand...
Heavyopp said:
Post video here, no instagram for me either.
Click to expand...
You should be able to view it on Facebook without an account.

Facebook

www.facebook.com www.facebook.com

We will be posting more videos on youtube in the next few days.
FYI, $150 is ending tonight!!
 
Upvote 0
Nsboost said:
Is the length of pull adjustable? It's a neat idea curious to see if there is any real discernable improvement. I seen this on the site but... Just couldn't find enough on it for me to pull the trigger today

And please tell me your not shipping these in the same bags you ship the arca rails in 😋
Click to expand...
We are seeing around 8% efficiency increases and more consistent loading that has produced better groups. It's hard to make certain claims with how everyone's rifles have different parts and are tuned differently. But there are improvements, especially in reliability over the pin probe.

We've switched to boxes.
 
  • Like
Reactions: Nsboost
Upvote 0
mtnGhost said:
It's a retracting probe system and butt stock carrier for the FX Impact. Clever design, in that it loads the ammo perfectly concentric like a pellet probe and then once it chambers the ammo, it retracts back so there is ZERO transfer port restriction.

Having made numerous slug probes, it's just about impossible to get them to load ammo perfectly square every time (equally impossible for them to rival the efficiency of a completely unrestricted transfer port).
Click to expand...
If you port your pellet probe you have the best of two worlds - pin probe like v0 and pellet probe like slug seating precision.

Samples below:
IMG_20220908_231420~2.jpg

Even Huma high flow pellet probe has too much restriction. But it is easy to resolve with some Dremel work.
 
Upvote 0
Seeker said:
If you port your pellet probe you have the best of two worlds - pin probe like v0 and pellet probe like slug seating precision.

Samples below:

Even Huma high flow pellet probe has too much restriction. But it is easy to resolve with some Dremel work.
Click to expand...
L-tech is more efficient than that. While enlarging it is better than oem, it still isn't optimal. Especially when dealing with various slug geometries. The flat probe allows you to load boat tails, pellets, slugs with a cusp, basically anything with the same seat depth no matter the shape.
Furthermore, there is still restriction. The ratios are different for each caliber, but you are taking up flow with any probe that doesn't retract.
 
Upvote 0
KrafordAndLypt said:
We are seeing around 8% efficiency increases and more consistent loading that has produced better groups. It's hard to make certain claims with how everyone's rifles have different parts and are tuned differently. But there are improvements, especially in reliability over the pin probe.

We've switched to boxes.
Click to expand...
Is the length of pull adjustable. Like the shoulder pad/stock area adjustable back? I always felt my impact was a touch short
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu