I have a G1 Gauntlet and want to upgrade the bottle to 4500psi. I've now mistakenly purchased two different bottles with the thread size 9f m18x1.5 instead of 5/8 18unf is this a normal problem that I just need to get an extra part for? Or is it that these paintball regulators don't fit those on purpose?
Bottle regulator threads not lining up.
- Thread starter Devindisguise117
- Start date
The vast majority of CF bottles on the market have metric threads. One exception is the First Strike bottle being discussed here:
www.airgunnation.com
If you don’t want to go that route, a new metric regulator to go with one of your metric bottles may be an option. Less expensive for sure but check the location of the fill port and gauge to verify it will work for you (i.e. 180 degrees or 90 degrees from each other). And depending on what output pressures you find off the shelf, you may or may not need to adjust the setpoint.
BARGAIN ALERT WITH LINK
https://ansgear.com/first-strike-hero-2-carbon-fiber-air-tank-half-pint-15-4500-black/ I don't need one, I have one, but paid over twice the price of this deal, and they are in stock!
www.airgunnation.com If you don’t want to go that route, a new metric regulator to go with one of your metric bottles may be an option. Less expensive for sure but check the location of the fill port and gauge to verify it will work for you (i.e. 180 degrees or 90 degrees from each other). And depending on what output pressures you find off the shelf, you may or may not need to adjust the setpoint.
Upvote 0
You can find them in standard I have before but it takes some digging I don't remember where from though google it with thread pitch in the search
Upvote 0
The thing is a little is a little crazy now but found a metric regulator and got a 28 grain slug moving at 980fps 
Upvote 0