Benjamin Bought a P-Rod Carbine

Jump to latest Follow Reply
AJ_Roberts

AJ_Roberts

Member
Jun 25, 2021
294
787
45
Hampshire, United Kingdom
Wasn’t sure were to post this tbh 😂

Anyway I picked this up off a forum in the UK

IMG_5470.jpeg


It came with a Bob P stock, Donny FL mod adaptor and I’ve added a Cerato copy 3-9x32 scope with SportsMatch mounts 👍
 
  • Like
Reactions: maxtrouble, beerthief, JaceSpace1369 and 13 others
oaks1450 said:
Congratulations! Very nice. Where did you get the stock?
Click to expand...

Thanks. It came with the Marauder, it was made by a guy called Bob Pattenden in the UK, sadly he only ships locally

www.bobpattenden.com

3dprinting | Bob Pattenden

3D printed accessories and gadgets from Bob Pattenden
www.bobpattenden.com www.bobpattenden.com
 
  • Like
Reactions: maxtrouble, Bandito and Modski66
Upvote 0
I probably said this before but I like a 12.5” LOP as I can mostly shoot in summer and winter with the associated coats or without. Any longer for me, is unhandy. I collect other shooter's data/experience. All agree that they can shoot a bit too short stock but not shoot a too long stock. I had to learn to shoulder a shotgun by pushing it out away from the shoulder then into the pocket. Slower and less precise! Try shooting doves like that. Works as poorly on squirrels with an airgun! Adjust your LOP to proper length for YOU. Rant over, Be Well Brothers, Bandito.
 
  • Like
Reactions: maxtrouble and AJ_Roberts
Upvote 0
I use both a Gen 2 mrod trigger on one gun, and a PROD trigger group on another custom mrod.....neither stock, both running 3-4 lbs of hammer spring so not much tension placed on either sear....I prefer the PROD trigger group over the Marauder trigger group, however I can see why one would prefer the marauder trigger, but the prod has the potential to be much lighter than the mrod. I have a little bit of custom work done to both trigger groups. Both set as two stage.

-Matt
 
  • Like
Reactions: AJ_Roberts
Upvote 0
AJ_Roberts said:
I tried a polish job and tuning the trigger, the first stage was always too heavy and short for my liking, I could tune it nicely as a single stage, but much prefer a 2 stage like all my other air rifles
Click to expand...

I replaced the one spring that sits under the sear for the prod for a much lighter one that still is strong enough (barely) to reset the trigger, makes a huge difference. The 1st stage on the Maruader is much longer than the prod for sure.

-Matt
 
  • Like
Reactions: maxtrouble and AJ_Roberts
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu