RAW Rapid Brand New RAW TM1000 for Rifle and Pistol multi-use platform.

[Cloud9AG]

Do they have a price?

$1599 any flavor you want. https://www.rapidairworx.com/category-s/170.htm

 

[Ljutic]

I just received my new tm1000 from Rapid air worx.

When I received the gun it was set up for 12.1 FPE all I had to do was back off the hammer spring a half a turn to bring it where I needed it. I filled it to 200 bar and shot 36 shots over the chronograph, looking at the pressure gauge I only dropped 25 bar. It appears this gun will get roughly a hundred shots or just under per fill.

It's is a real sweet setup. Just got a scope mounted last night, I made a uit rail for the m lock system, installed some modified dovetail to picatinny adapters and this is almost exactly how I'll be shooting it in competition.

I will be installing a proper butt plate, a kneecup style hamster shelf and one of my magnetic detachable side Wheels on the scope. The scope is the brand new falcon X 505 ft which I will be testing to see if it is something I want to use this season.

View attachment 402248

Keep us posted on how it shoots. I've been looking at getting one too.

 

[Ljutic]

I just received my new tm1000 from Rapid air worx.

When I received the gun it was set up for 12.1 FPE all I had to do was back off the hammer spring a half a turn to bring it where I needed it. I filled it to 200 bar and shot 36 shots over the chronograph, looking at the pressure gauge I only dropped 25 bar. It appears this gun will get roughly a hundred shots or just under per fill.

It's is a real sweet setup. Just got a scope mounted last night, I made a uit rail for the m lock system, installed some modified dovetail to picatinny adapters and this is almost exactly how I'll be shooting it in competition.

I will be installing a proper butt plate, a kneecup style hamster shelf and one of my magnetic detachable side Wheels on the scope. The scope is the brand new falcon X 505 ft which I will be testing to see if it is something I want to use this season.

View attachment 402248

I am thinking of getting the chassis stock. My question is, will the comb raise up height enough to get a good anchor to center on the scope? Thanks, Bill

 

[jps2486]

It already has a lighter hammer than I'm used to from the factory. I'll try and get the weight this week. I'm making an SSG for it this week as well!

With this in hand I'm really considering selling my HM1000 in .20 to buy one of these in .20.

Why? Just get a chassis for your HM action and you have the same thing but it's a repeater instead.

 

[cavedweller]

Why? Just get a chassis for your HM action and you have the same thing but it's a repeater instead?

I’ve owned several variations and I prefer the TM for HFT pistol

 

[Motorhead]

Decided to shoot my MFR/Chassis at this weekends Oregon state / GP event in the pistol match. Built it as a WFTF rifle / Pistol being either - or, but too date not shot it at a major event.