My Bantam Sniper doesnt like slugs, very hard to feed, wont group and after a few shots I can hear air inside the stock after each shot as it blown the breech seal...help!
Brocock bantam sniper slugs
- Thread starter poppas49
- Start date
If you believe its the breech Oring, why not simply replace and go from there? If you’re still hearing air “inside” the stock then it’s something else. The rifle is shipped with spares… Good luck!
Upvote 0
@poppas49 Which types of slugs have you tried shooting? Which ones are causing your breech o-ring to come out? What’s the slug’s diameter that you’re shooting? Have you tried shooting FX Hybrid slugs? The most common way I’ve seen that breech o-ring blown out of a Bantam Sniper is by not fully engaging the bolt/lever (pushing it closed/ all the way forward) before pressing the trigger.
Last edited:
Upvote 0
My .177 Brocock Bantam chambers and shoots the 13.43g JSB Knockout slugs the exact same as 13.43g JSB Monster pellets.
Occasionally, a slug may get hung up in the mag if I try to cycle the action too fast.
Occasionally, a slug may get hung up in the mag if I try to cycle the action too fast.
Upvote 0