Hi y'all. I'm having issues with my first pep from the mags getting stuck and not rotating to blowing out the breech seal. I just wanted to pass on info I gathered during my limited time since owning this rifle. I bought breech seals from England on eBay stating that they work on most Brocock including the contour s6. After about three weeks I received them and place on in the breech. It was obvious that the seal was too big and thick. I contacted the seller and he informed me that it was a factory seal... What ever. Okay this is what I did, on the rear of the bolt there's a seal I pulled it off and replaced it with one of the ones from eBay then I placed the bolt seal in the breech and it worked perfectly.
I also found a post on here about the breech seal size 1.5X5mm and went ahead and ordered10 locally.
i just wanted pass on the info being this site and members have been so helpful thank you all.
also was it a mistake to get the Brocok contour S6 as my first pcp there's not much info on the Internet on there guns.
thanks and God bless
Sergio Miami,Fl.
I also found a post on here about the breech seal size 1.5X5mm and went ahead and ordered10 locally.
i just wanted pass on the info being this site and members have been so helpful thank you all.
also was it a mistake to get the Brocok contour S6 as my first pcp there's not much info on the Internet on there guns.
thanks and God bless
Sergio Miami,Fl.