Tuning Built a moderator for the Zoraki

[biohazardman]

The gun already had the threaded barrel on it so it was begging me to put on a moderator.

I had some 25mm carbon fiber tube, left from a purchase made years back, and a piece just the right size left over from the 600 moderator I made a week or two back. So I just turned down a couple pieces of Delrin and there it is. Took two tries though cuz I tried to recycle some old Delrin parts and they did not werq out. Anyway I still have to get some new epoxy though as the stuff I used on the 600 is still a little tacky a week later. Although it was a new and unopened package from some years back.

Sounds like it was easy and a few years back I would have had it done in less than an hour. But not so capable these days and it took half the day. Still I did finally get it finished except for the gluing yet to come. I shot prototype one moderator, the one I messed up and it was very quiet. So I know It's going to be nice.

 

[Odoyle]

NICE .

Thought they don't come threaded from the factory.

Dont use a potato to power a light bulb.

 

[Guest]

Nice work. Looks awesome

 

[biohazardman]

Odoyle

I don't think they come like that from the factory either but I bought it used so got it this way. Lucky me!



HPAman

Thanks it turned out pretty good hope it shoots as well.

 

[8thman]

Nice job, my P2 kind of the same gun but mine is not have threads . I may be able to find the correct size tube to glue it into the mussel , looks like there’s a 10mm od and around 15mm of gluing surface. That gives me a start. Where did you find the plastics and or carbon fiber? I have various junk parts just not quite the correct one.

 

[Odoyle]

Nice job, my P2 kind of the same gun but mine is not have threads . I may be able to find the correct size tube to glue it into the mussel , looks like there’s a 10mm od and around 15mm of gluing surface. That gives me a start. Where did you find the plastics and or carbon fiber? I have various junk parts just not quite the correct one.

I would order the GENUINE Crosman 2240 XL or Benjamin Maximus HUNTER threaded barrel adapter and mod it to fit. Purchased direct from Crosman.

 

[JohnnyPDX]

That addition looks like it was meant to be there, very nice work.

 

[biohazardman]

Nice job, my P2 kind of the same gun but mine is not have threads . I may be able to find the correct size tube to glue it into the mussel , looks like there’s a 10mm od and around 15mm of gluing surface. That gives me a start. Where did you find the plastics and or carbon fiber? I have various junk parts just not quite the correct one.

I found the Delrin at Online Metals, they sell small quantities, and eBay for the 25mm carbon fiber tube if memory serves cuz I got it years ago.

https://www.onlinemetals.com/en/buy/plastic-round-rod?q=%3Aprice-asc%3APlasticType%3AAcetal%2B%2528Copolymer%2529%3AColor%3ABlack%3Amscale%3Ainch&checkbox=on&sort=price-asc#

 

[biohazardman]

Nice job, my P2 kind of the same gun but mine is not have threads . I may be able to find the correct size tube to glue it into the mussel , looks like there’s a 10mm od and around 15mm of gluing surface. That gives me a start. Where did you find the plastics and or carbon fiber? I have various junk parts just not quite the correct one.

I would order the GENUINE Crosman 2240 XL or Benjamin Maximus HUNTER threaded barrel adapter and mod it to fit. Purchased direct from Crosman.

The adapter on the gun is actually threaded directly to the skinny little barrel and has the standard 1/2x28 threads on the other side. It is a pretty nice little unit.

 

[RobR]

Nice work! That’ll be a nice addition for anywhere, indoors especially not that they were overly loud.


Glad to see you utilize the adapter. I really hoped I was doing you a favor sending them your way as that .22 was the one and only I could find when I looked years back. Of course six days after they hit your doorstep they start to resurface new and in the ultra configuration... I searched for all I was worth for a shoulder stock at the time I snagged the .22

 

[biohazardman]

Not overly loud with one pump but more than I like with two. Yes, pretty insane that they became available again a few days after I purchased your guns. I really did not Need more but I just had to get the Ultras. Thanks for the guns I have been enjoying them allot. They helped adjust my attitude a bit also. Shooting with one pump is easy and the arms really appreciate it.