• *The discussion of the creation, fabrication, or modification of airgun moderators is prohibited. The discussion of any "adapters" used to convert an airgun moderator to a firearm silencer will result in immediate termination of the account.*

Bushing for Harrells tuner / update..mounted one up 😎

Jump to latest Follow Reply
Jaxjax

Jaxjax

Member
Oct 17, 2022
402
380
57
Toledo Wa USA
I have a Harrells barrel tuner coming for a .719 LW barrel on a RAW. The Tuner comes at .750. Difference of .031, so I think I need shim stock /bushing of .015 x ..719 or flat stock of .015 x 1.438 length .? where would I get such a bushing made up ? or could I just use flat shim stock & wrap barrel end at muzzle. I think these Harrells tuners slip on about an inch over muzzle. ? I called Harrels before I predered one & they said just have a bushing made up. There minimum is .750 so no changing that.
PXL_20240928_200858866.jpg
PXL_20240928_202101614.jpg
 
Last edited:
Jaxjax said:
I have a Harrells barrel tuner coming for a .719 LW barrel on a RAW. The Tuner comes at .750. Difference of .031, so I think I need shim stock /bushing of .015 x ..719 or flat stock of .015 x 1.438 length .? where would I get such a bushing made up ? or could I just use flat shim stock & wrap barrel end at muzzle. I think these Harrells tuners slip on about an inch over muzzle. ? I called Harrels before I predered one & they said just have a bushing made up. There minimum is .750 so no changing that.
Click to expand...
The last time I talked to Harrell’s, I was told they would make a bushing to fit my barrel.
 
  • Like
Reactions: Jaxjax
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu