Can This Be Removed?

[brawler1588]

So I think I know the answer already but hey worth a shot. Now I get it's his business and it's a way of promoting said business but main totally throws off the flow of the ghost. Now it's not a sticker or decal it's all flush so I don't think there is a way to get ir off but it's worth an ask. Thanks everyone for the help.

 

[Deleted member 50932]

I use Goo Gone, I spray it and let it set, then remove with a green scratch pad, it’ll leave a little mark on the bottle, but it gets rid of the sticker.

 

[brawler1588]

I use Goo Gone, I spray it and let it set, then remove with a green scratch pad, it’ll leave a little mark on the bottle, but it gets rid of the sticker.

It's not a sticker it's flush and on the bottle.

 

[_CTAIRGUNNER_]

You would likely have to completely strip it of the clear, remove the "decal" reclear, or wrap it with the 50mm heat shrink?

 

[markhooper]

after you remove it.. if it leaves marks, figure out if it's blued or black and they used to have like permanent marker that was bluing or blacking..

 

[beerthief]

you could put a shrink wrap cover over it

 

[WorriedMan]

Brawler,
Agreed, hate it when they do that, I'd head to eBay and search "Neoprene Buddy Bottle Cover," a black one would look good, protect bottle and cover sticker. WM

 

[Healthservices]

It's under the resin.


Allen

 

[jarmstrong]

if you can't remove,,, then cover,

Ghost in the machine sticker,

https://www.redbubble.com/i/sticker/Ghost-Army-of-World-War-II-by-gregbukovatz/129407537.EJUG5

 

[woogie_man]

Put another sticker over it if you are not able to remove it.

Either that or a cover. But I am with you, I HATE it when companies do this. Would rather them just send a sticker or me to put where I want.

 

[Healthservices]

I put a large heat shrink wrap on mine.

Allen

 

[Gerry52]

Fine sand the resin coating on it, mask around it with painter's tape, spray paint it black. Might not perfectly match but BETTER than seeing THAT!

 

[Mycapt65]

Looks printed on the bottle. Carbon fiber resins are very forgiving of chemicals. I'd try acetone and 400 grit sandpaper. I've built and refinished probably a thousand graphite (carbon fiber) custom fishing over the last forty one years. A few unlimited tuna rods that see crazy amounts of stress. Their biggest Achilles Heel is focused sharp blows and excessive heat. Heat breaks down the resins that hold the carbon fiber together

 

[kayaker]

If it is new I'd have him exchange the bottle for one that dosen't have his advertisement on the gun that is B.S. If he refuse's send it back for a refund and find a different dealer.

 

[Mycapt65]

Carbon fiber is easily refinished if you don't like the matte finish from sanding

 

[Hateful McNasty]

I had some orange cleaner spray stuff that would cut it .. think it's was crc brand. Cant recall anything that stuff did not remove.

This type of stuff

• Clean and remove heavy oils, grease, silicone, tar, paraffinic materials such as wax, labels, stickers, dirt, marker and other soil and contaminants from a variety of substrates

https://www.3m.com/3M/en_US/p/d/b5005047174/.

You may just have to start with somthing like acetone on a rag covering it a few hrs to see it it loosens up or thinners , ect... You'll stumble on somthing . Maybe it could come down to scratch paper.

 

[Healthservices]

For me I would not put any type of solvent on the resin, as it risks the chances of weakening the resin that holds the carbon fiber.


Allen

 

[Hateful McNasty]

For me I would not put any type of solvent on the resin, as it risks the chances of weakening the resin that holds the carbon fiber.


Allen

For me I would not put any type of solvent on the resin, as it risks the chances of weakening the resin that holds the carbon fiber.


Allen

For me I would not put any type of solvent on the resin, as it risks the chances of weakening the resin that holds the carbon fibe

 

[Hateful McNasty]

For me I would not put any type of solvent on the resin, as it risks the chances of weakening the resin that holds the carbon fiber.


Allen

I did not notice or just ignored that cf tank . May be a good point on any solvents .. looking like a personal sticker to cover that one up or risk spray painting over it ..lol

 

[marflow 777]

https://www.google.com/search?q=bla...SAQM2LjWYAQCgAQG4AQPAAQE&sclient=gws-wiz-serp