Can't find a moderator for .357 or 9mm

[Gsyme]

I'm having a very hard time finding a moderator for my .357 carbine. It's a DAQ. I've found a slip-on adapter with the standard 1/2 x 20 threads but can't find a moderator itself. Any suggestions on where to shop? So far, all the companies I've found online only seem to go up to .30. I know Donny FL made some for .357 but they are out of stock or discontinued any place I look. Not seeing any recently come up on the classifieds here.

Thanks much for any tips.

- G

 

[rangur1]

Donny’s the only one that goes up over 30 cal that I know of. His Yokozuna is a newer one. Find who is the dealer of these, all I can think of.
*the pellet shop has them but it’s m18 thread. Maybe they have an emporer in 1/2x20

 

[Scotay42]

You need an adapter that is m18.

 

[Ezana4CE]

I'm having a very hard time finding a moderator for my .357 carbine. It's a DAQ. I've found a slip-on adapter with the standard 1/2 x 20 threads but can't find a moderator itself. Any suggestions on where to shop? So far, all the companies I've found online only seem to go up to .30. I know Donny FL made some for .357 but they are out of stock or discontinued any place I look. Not seeing any recently come up on the classifieds here.

Thanks much for any tips.

- G

@Gsyme Where’d you look?

DonnyFL | EMPEROR V3 Moderator – The Pellet Shop

This Emperor is for the serious high powered airgunner. This version has a mono-core design and allows you to screw on an optional 6.5 inch extender to make it even quieter. Features: compatible with .22, .25, .30, .308, .457 and .50 caliber Please note: does not come with adapter, please look...

www.thepelletshop.com

DonnyFL EMPEROR V3 – 2″ x 10.5″ – Palm Beach Airguns

palmbeachairguns.com

DonnyFL Emperor V3

This Emperor is for the serious high powered airgunner. This version has a mono-core design and allows you to screw on an optional 6.5 inch extender to make it even quieter. Features: compatible with .22, .25, .30, .308, .457 and .50 caliber Please note: does not come with adapter, please look...

spaweapons.com

Maybe call one of these shops and see if they can meet your need with the desired endcap.

Ronin/Emperor Endcaps – DonnyFL

Interchangeable rear endcaps for the latest model of Ronin and Emperor. Works with models with the grooves in the front cap.

donnyfl.com

 

[AlanMcD]

There is one up for sale on the classifieds right now . . . . https://www.airgunnation.com/threads/donnyfl-emperor-357-and-extension-tube.1298463/

 

[Gsyme]

Sweet. I'm apparently an incompetent searcher. Thanks all. None of those sites came up in my searches: I checked Pyramyd, airgun depot, utah, topairgun, google, etc. I'd never even heard of the Pellet shop. I even missed that current classified somehow, it must have just popped up. Roger on the M18 rather than the 1/2 x 20.

Thanks again,
- G

 

[Ezana4CE]

@Gsyme No worries. You don’t know until you know. I hope you find what you’re looking for.

 

[Cranky1]

Sto is making one for the big bores now

 

[Roachcreek]

This week, STO has a new core for the Sarissas that is called the Extreme high flow core.

And yes you need a M18x1 threaded dapper.

Regards,

Roachcreek

 

[Cranky1]

Well the sto easily beats the ronin on my m3 357. Im running the tensioned kit(unshrouded) at 170-175 fpe. It passed the wife test with the Sarissa extreme flow but not the ronin. Im shooting off the front porch while she is in the house. If it’s hard for her to hear it passes.