I need a carbon fiber bottle .5L without a valve that will work on a fx crown . where can I buy one for the best price, does not matter if its made in china. I have my own compressor
carbon Fiber bottle
- Thread starter dparsons
- Start date
You'll need to email them to get cost and shipping. A few guys here are using them without problems being reported ( https://www.airgunnation.com/threads/700cc-300-bar-cf-bottle-on-fx-impact.1091607/ )
https://www.alsafechina.com)
/html/product/show/?id=189
https://www.alsafechina.com)
/html/product/show/?id=189
Upvote 0
I believe cc (cubic centimeter) is also a metric unit and has a direct relation to liters (cc/1000 = liters) but someone can correct me if I’m wrong.
Upvote 0
A 530cc Uragan bottle might fit. The threads are the same. Its the depth of the threads on the Crown receiver thats needs to be measured.
Upvote 0
Can you remove the valve from one of the alumnium FX bottles (Used on the VP models) and use it on a carbon fiber tank?
Upvote 0
I got a 500 cc / 0.5 L bottle from Ali ( can not remember the brand ) but it look & feel as good as any other bottle i have seen, picked up a stainless FX bottle insert in the UK.
Now all my CF bottles work on both my Maverick and AGT Vulcan 3, and i can swap tanks without loosing plenum pressure, which are a big deal not least in the Vulcan 3 with its huge plenum, and not least since i only use the small plenum as a .177 shooter.
So the Vulcan 3 in small plenum setup have like 100 - 150 CC of volume in front of the regulator, and then + what ever is in the tank.
Mind you the original AGT bottle, the not valved fitting in it,,,, all i have left now to get it out is to heat it to temperatures way past my comfort zone, CUZ damn that thing are in there good,,,,, but i refuse to believe it is part of the ALU the CF are spun around, so it just got to be able to come off, but GD AGT have gotten that part mounted strong.
Now all my CF bottles work on both my Maverick and AGT Vulcan 3, and i can swap tanks without loosing plenum pressure, which are a big deal not least in the Vulcan 3 with its huge plenum, and not least since i only use the small plenum as a .177 shooter.
So the Vulcan 3 in small plenum setup have like 100 - 150 CC of volume in front of the regulator, and then + what ever is in the tank.
Mind you the original AGT bottle, the not valved fitting in it,,,, all i have left now to get it out is to heat it to temperatures way past my comfort zone, CUZ damn that thing are in there good,,,,, but i refuse to believe it is part of the ALU the CF are spun around, so it just got to be able to come off, but GD AGT have gotten that part mounted strong.
Upvote 0