My order shipped free also. It took them over a week to process my order. I suspect this was due to the May Day holiday in China. My order is currently shipping via UPS and is due in later this week.
Upvote 0
G
Guest
Guest
That was the same experience for me. Never ordering from them before, I was a little concerned but they did come through for me. I would order again from them.
Upvote 0
I received my valves today via UPS in a soft pack. They seem to be very heavy duty. It looks like my tank is in Thursday.
Upvote 0
This is getting interesting. My tank is being held in a government warehouse at the port of entry (Kentucky). Somebody decided it needs to have DOT certification unless a special circumstance exists. I received a DOT form from UPS and was asked to fill it out. While scratching my head looking at the form, UPS called and said to forget filling it out. I told them it would not be used for SCUBA.
This is a large 9L tank and I guess it set off a few alarms. The saga continues.
This is a large 9L tank and I guess it set off a few alarms. The saga continues.
Upvote 0
G
Guest
Guest
Good to know. I didn't know that would happen. I didn't have any customs issues with my small bottle.
Upvote 0
My tank finally arrived yesterday. It's a 9L (1 hour) tank complete with tank valve and fill adapter for $247.16. The valve setup alone would have cost over $100 via Ebay. The tank was manufactured 10/20/2018 by AceCare and is visually flawless. However, it is not DOT certified.
I started filling it yesterday but had to stop due to a Yong Heng compressor seal failure. I'm not running a priority valve on my filter setup so several prefills were done using and existing 30 minute tank to bring the pressure up to roughly 20 MPA (2900 PSI). The new tank was then filled to roughly 30 MPA (4350 PSI) after fixing my Yong Heng compressor.
Overall, I'm happy. This type of setup is only good for folks willing to do their own tank filling since no dive shop will touch it without DOT certification.
I started filling it yesterday but had to stop due to a Yong Heng compressor seal failure. I'm not running a priority valve on my filter setup so several prefills were done using and existing 30 minute tank to bring the pressure up to roughly 20 MPA (2900 PSI). The new tank was then filled to roughly 30 MPA (4350 PSI) after fixing my Yong Heng compressor.
Overall, I'm happy. This type of setup is only good for folks willing to do their own tank filling since no dive shop will touch it without DOT certification.
Upvote 0
wow man great info I was surfing all over the internet trying to find a good safe deal made my order today got a 60 min tank for 211.00 w/fill station can't wait to fire up my altaros booster see how long it takes to fill
Upvote 0
I received mine today. It came Fedex, and took 3 weeks from the order date.
The tank looks great, but I'm not thrilled with the valve and fittings. Pretty cheap for sure so I'll have to see how they hold up.
I filled the tank with my LC115 with no issues.
I'll probably be ordering another assuming the tariff doesn't significantly raise the price
The tank looks great, but I'm not thrilled with the valve and fittings. Pretty cheap for sure so I'll have to see how they hold up.
I filled the tank with my LC115 with no issues.
I'll probably be ordering another assuming the tariff doesn't significantly raise the price
Upvote 0
lee545 brother you saved me 500.00 dollars on a setup for my airgun I'm really happy with the purchase I made from pcpmall I wouldn't have known the store existed if no for you thread keep this thread alive it's a money saver. 211.00 for everything you see 
Upvote 0
G
Guest
Guest
lee545 brother you saved me 500.00 dollars on a setup for my airgun I'm really happy with the purchase I made from pcpmall I wouldn't have known the store existed if no for you thread keep this thread alive it's a money saver. 211.00 for everything you see
My pleasure, I'm glad I could help you guys out! I'm really happy I found them when I was looking for my 500cc bottle for my 30 cal build.
Upvote 0
2mucuchair4leya,
I would like to hear your thoughts and likes/dislikes on the fill valve assembly that came with your tank. I am considering purchasing the same type setup as you have.
I would like to hear your thoughts and likes/dislikes on the fill valve assembly that came with your tank. I am considering purchasing the same type setup as you have.
Upvote 0
I do know that some of the foster fittings are brass on some of the Chinese tanks. We had a member on another forum have one let go, emptying the bottle, and the fitting on the hose struck his foot. He was slightly injured, but not seriously.
It would be a good idea to replace the high pressure foster fittings with a stainless high quality fitting.
Cheap insurance.
Knife
It would be a good idea to replace the high pressure foster fittings with a stainless high quality fitting.
Cheap insurance.
Knife
Upvote 0
The biggest pain so far has been the "slow fill". It is far to restrictive IMHO. It takes several minutes to fill my gun which I find unacceptable.
Hopefully I can figure out some way around the problem.
Hopefully I can figure out some way around the problem.
Upvote 0
I would feel MUCH safer with a cheap tank and a GOOD valve. If the valve suddenly gives way (with pressure in the tank) then you have a projectile being propelled from the end.
Not to scare you, but below is what can happen when a valve gives way.
Edit - not sure why but embedding videos gives nothing now.
https://www.youtube.com/watch?v=w1_CQc85jrU
https://www.youtube.com/watch?v=VSYJqBzJAUE
https://www.youtube.com/watch?v=f-xmaPSZ6GM
Upvote 0
I am looking at their site right now and see a 6.8L set up with valves for PCP and a 9L set up with valves for Paintball. The paintball valves look different.
The 6.8L is $211 the 9L is $247
Will the valves on the 9L work for PCP application?
TIA
Gary
The 6.8L is $211 the 9L is $247
Will the valves on the 9L work for PCP application?
TIA
Gary
Upvote 0
Still waiting for mine to arrive.
Placed the order on 7/6 and it is still not filled......Hmmmmm
I sent a message
Placed the order on 7/6 and it is still not filled......Hmmmmm
I sent a message
Upvote 0