Tuning Carbon sleeve FX Crown.

danny5692:

Thank you so much for sharing the stl files for this design. I was wondering whether you would consider creating a repository or shared folder that contains the stl files for all the designs that you have shared, and from which one can download all these files. As an example, I am hoping to download the design file for the FX crown power adjuster wheel, so that I can 3d print it.

Thank you again!
 
20220105_152811.1641404500.jpg
I have had some good results with the carbon sleeve on my M3. So I've made the same sleeve on my FX Crown. It took two new spacers over the carbon part. These are printed parts that I have drawn this morning.

Fits like a glove.
20220105_151535.1641404245.jpg
20220105_151338.1641404246.jpg
20220105_105239.1641404247.jpg

thank you for sharing. I printed it and works great. 
 
Long story short, I bought an FX CF barrel sleeve from Talon Tunes before I saw this thread. When I disassembled the gun, the spacers between the barrel and the shroud obviously would not fit. So I called Talon Tunes and Tony told me they weren't necessary just toss them. So I did, and I fired the gun after reassembly, with a DonnyFL on the end. Well, obvious to me now, the shot caused significant damage to the DonnyFL. That sucks. Lesson learned. Fortunately that was it.

Then I found this thread, printed up the RTL, but the design did not turn out because I have a normal FDM printer not a resin printer. 

So I designed my own version.

installed.1649812703.jpg


I have printed some extra so if anybody in the U.S. needs them check out the classified. Rigid, high temperature and strong ABS plastic that won't warp if left in a car on a hot summer day. (I wouldn't use PLA for these unless you're sure you'll never leave your gun in a car or truck on a hot summer day). They are for 0.25, but if you have a .177, .22, or .30 FX Crown get me the outside diameter of the CF sleeve and I can print some up for you to test. Check out the classifieds. 
 
excellent work!!!

In my 600mm crown barrel I also added the carbon liner sleeve but I just used 1 factory spacer at the very end and so far so good. IMOH having only 1 spacer at the end make the barrel behave more like a traditional free floating barrel, spacers in the middle only introduces variables when it comes to harmonics and primary reason I want the liner sleeve.
This works?
I just got a crown mkii and want to install a cf sleeve very soon