So I'm aware of their (carm) magazines for a while now. Just now looking into getting one or a few for different airguns if they make them. Does anyone know what these have been printed with? They look printed to me. Are they glass or fiber reinforced? Also, is there a source in the USA and if not, how long does it usually take via mail/customs.. ?
Carm Magazines?
- Thread starter MACTEN
- Start date
You will get great service from Darko. They usually arrive here in the Midwest within a couple of weeks. You have to buy them on line direct from him in Croatia.
I have found the quality to be ok. I have purchased magazines, but mostly I use his single shot loaders.
I have found the quality to be ok. I have purchased magazines, but mostly I use his single shot loaders.
Upvote 0
I don't know what they are printed out of but Darko will tell you if you send him an email. I have found them to be sturdy. I have one single shot loader for my P35-25, a magazine for my 25 Avenger, and two magazines each for my P35-22 and P35-177. All of these devices work well. The P35 magazines are a little snug in the gun initially but they need to be. The SPA magazines have magnets to hold them in place which the CARM magazines do not have. So they depend on friction. After use, they fit better than they do initially. No issue on the Avenger magazine. It takes a few weeks for the package to get to the U. S. but you will get good service from Darko.
Upvote 0
you won't find any aftermarket magazine made better and Half the price of stock magazines, the material is good and sturdy
Upvote 0
Three weeks time average delivery to Texas. They look like, well they look like plastic 3D printed magazines, but they have performed flawlessly to me. I’d tucked a broken manufacturer’s magazine away for almost a year after I got some CARM Mags. And the price is right. They’re good in my book.
Upvote 0
Good info from all of you! I think I'll have to order a couple !
Thanks again to everyone for the heads up!
Thanks again to everyone for the heads up!
Upvote 0
@MACTEN I think it’s worth searching the threads and reading what other members have said about the specific mags you’re considering purchasing before ordering. I haven’t read any bad reports, but good to take what’s been said into consideration. I think you’ll like them. I ordered two at first and should’ve ordered four.
Upvote 0
MACTEN,
Agree with others, well-made product, great customer service and fair pricing. The CARM magazine for my Generation One Umarex Gauntlet .25 was too narrow for use and money refunded. Casino7095's video, "Part 3, Avenger Bullpup", also had an unusable CARM mag (.22) for same reason. Only two instances I'm aware of CARM magazine issues. WM
Agree with others, well-made product, great customer service and fair pricing. The CARM magazine for my Generation One Umarex Gauntlet .25 was too narrow for use and money refunded. Casino7095's video, "Part 3, Avenger Bullpup", also had an unusable CARM mag (.22) for same reason. Only two instances I'm aware of CARM magazine issues. WM
Upvote 0
CARM mags are terrific. I have about half a dozen for various rifles and each of them works perfectly……..typically 2-3 week delivery time to U.S.
Upvote 0
I just got a package from them last week.
This is my third order. The first was for 4 magazines for my RTI Prophet. Three weeks sounds about right, if I recall.
Second order was for a couple of extra RTI mags and a single shot loader for it and my Umarex. The SSLs are great!
The most recent order also took about 3 weeks. My first magazines were the open type. I really like them because they are so easy to load, but wanted to try the closed type.
So far, I have been quite pleased with everything I have gotten from CARM.
This is my third order. The first was for 4 magazines for my RTI Prophet. Three weeks sounds about right, if I recall.
Second order was for a couple of extra RTI mags and a single shot loader for it and my Umarex. The SSLs are great!
The most recent order also took about 3 weeks. My first magazines were the open type. I really like them because they are so easy to load, but wanted to try the closed type.
So far, I have been quite pleased with everything I have gotten from CARM.
Upvote 0
I've ordered 3 times for my Avenger/Marauder mags. Very pleased with the mags. Took an average of 3 to 4wks for delivery. They get held up in Customs. Takes longer around Christmas. I 'd get my order in quickly.
Upvote 0
I bought several Carm mags for my Redwolfs, Uragan and P35 Snowpeak, also single loaders for these rifles, all work faultlessly. You cannot go wrong.
Upvote 0
I have 6 for my Daystate rifles and one for my RAW, all work perfectly. I don't know anything about the printing process, and what different materials are feasible for fabrication. I'm sure these are not as strong as the factory mags that are mostly metal. But, how strong do they need to be? I can't imagine an issue with durability under normal conditions.
Upvote 0
Not sure if this the right time to be ordering overseas - ordered mags 6 weeks ago - still don't have them.
Upvote 0
I ordered two magazines and they arrived in US customs on 11-2 and their still setting there.
Upvote 0
Hmmmmm, I got mine in under 3 weeks, but then I've got a Customs fast pass for my business. They are good mags, a touch of a pain to load but then that's me, been good. Darko is great on communications.
Upvote 0
I got some Carm magazines for my Vulcan , Uragan, But if your ordering magazines for a RTI gun check out ORION , Not sure if he makes other brand magazines , But the Orion RTI magazines are a few clicks above Carms , And I have both seting right in front of me.
Orion Iguana Hunter
orioniguanahunter.com
Upvote 0
I bought 4 Carm mags and a single shot tray for my Puncher Pro in 25 cal. The rifle was supposed to come with the single shot but did not. I like the Carm mags and use them all the time. Perfect fit. You wont be sorry.
Upvote 0