RAW Rapid Chassis Stock is not working out.

[Motorhead]

So after numerous attempts to get this at my comfort level I’m considering getting a different stock such as the LRT but am open to other suggestions.
Just can’t seem to get my eye in the right position without getting a stinkin crick in my neck!
I bought an Element 14x50 immersive to get that close eye relief I like.
But I’m still finding I need a riser to get it up enough to semi comfortable too.
Maybe someone wants to swap out this one for a different one?

I do a combination of hunting and some bench.

Change BUTT ASSEMBLY to different style that drops the shoulder pad and in return raises the action higher relative to your natural line of sight
Such as .... stock being this #1 pic to this #2 pic
* Type butt Pad/plate style/type you can also change with the #2 type assembly.

 

[Chasdog]

It may have already sold by now. It also had a broken ear that was glued back on. Don’t remember the price.

 

[Moonpie]

Change BUTT ASSEMBLY to different style that drops the shoulder pad and in return raises the action higher relative to your natural line of sight
Such as .... stock being this #1 pic to this #2 pic
* Type butt Pad/plate style/type you can also change with the #2 type assembly.

View attachment 550814

View attachment 550815

That’s it!
I know it was brought up earlier in another thread I think,but what brand is it?
Something Skeleton wasn’t it?

 

[Motorhead]

That’s it!
I know it was brought up earlier in another thread I think,but what brand is it?
Something Skeleton wasn’t it?

Originally marketed under the "Total War" branding, there is another one out there a good friend found On-Line that looks like this.
Same basic configuration where Butt can be changed out, different skeleton frame section tho.

 

[Moonpie]

Originally marketed under the "Total War" branding, there is another one out there a good friend found On-Line that looks like this.
Same basic configuration where Butt can be changed out, different skeleton frame section tho.

View attachment 550829

Sounds good
Think I’ll give Total a call and see if they can help me.
Thanks

 

[Moonpie]

Ordered the Total War Tactical.
Hopefully it will help.
So now another question…
How high is too high on mounting my 14x50 immersive?
In other words can risers be stacked to get my comfort?
Or am I asking a stupid question?
Go ahead let me have it if so
I know it’s not really the best practice but with a pcp is it different with no recoil?
I want to get this thing up and running

 

[Moonpie]

 

[Motorhead]

Higher an optic is mounted above the barrel, greater becomes the hold over amount and a steeper progression with correction required for shots INSIDE / CLOSER than your zero range.
But further shots will trend to appear having a flatter trajectory profile.
CANT errors also happen easier as for any DEGREE of tilt / cant that is present has the bore / retical alignment move further & faster off the ideal vertical center line.

If you monitor CANT and get good D.O.P.E. not an issue IMO .. Or if shooting at a fixed distance and adjusted to said POA/POI

 

[Moonpie]

Higher an optic is mounted above the barrel, greater becomes the hold over amount and a steeper progression with correction required for shots INSIDE / CLOSER than your zero range.
But further shots will trend to appear having a flatter trajectory profile.
CANT errors also happen easier as for any DEGREE of tilt / cant that is present has the bore / retical alignment move further & faster off the ideal vertical center line.

If you monitor CANT and get good D.O.P.E. not an issue IMO .. Or if shooting at a fixed distance and adjusted to said POA/POI

Believe I’m going to bring it down to where it should be and hopefully the new buttstock will solve my problems.

I don’t like to have something that looks like Captain Cobb was on the job!