RAW Rapid Chassis Stock is not working out.

Jump to latest Follow Reply
Moonpie

Moonpie

Member
Mar 7, 2025
53
25
Mills River NC
So after numerous attempts to get this at my comfort level I’m considering getting a different stock such as the LRT but am open to other suggestions.
Just can’t seem to get my eye in the right position without getting a stinkin crick in my neck!
I bought an Element 14x50 immersive to get that close eye relief I like.
But I’m still finding I need a riser to get it up enough to semi comfortable too.
Maybe someone wants to swap out this one for a different one?

I do a combination of hunting and some bench.
 
Moonpie said:
So after numerous attempts to get this at my comfort level I’m considering getting a different stock such as the LRT but am open to other suggestions.
Just can’t seem to get my eye in the right position without getting a stinkin crick in my neck!
I bought an Element 14x50 immersive to get that close eye relief I like.
But I’m still finding I need a riser to get it up enough to semi comfortable too.
Maybe someone wants to swap out this one for a different one?

I do a combination of hunting and some bench.
Click to expand...
You’ll find on the Chassis Stock the cheek rest is considerably higher than a typical sporting stock. If you buy some risers to get it up about 2.75-3.25” high to bore centerline it will probably be enough for the comfort level you‘d like. Had to do the same on mine As do most people.

As far as Airguns USA stocks go, it really doesn’t get much better, Impeccable workmanship!

Joe
 
  • Like
Reactions: Chasdog and Ranchibi
Upvote 0
JoeWillie said:
You’ll find on the Chassis Stock the cheek rest is considerably higher than a typical sporting stock. If you buy some risers to get it up about 2.75-3.25” high to bore centerline it will probably be enough for the comfort level you‘d like. Had to do the same on mine As do most people.

As far as Airguns USA stocks go, it really doesn’t get much better, Impeccable workmanship!

Joe
Click to expand...
Sounds good
Any chance you could give me a link or specifics on your combination of risers as I’m only finding a few risers that aren’t quite that high as a single unit.
Thanks
 
Upvote 0
This chassis will get you in the correct position.

It all comes down to how much do you want to spend. I would think that any style of ar buffer tube stock would fit.
20240501_165856.jpg
 
  • Love
  • Like
Reactions: Chasdog and Ranchibi
Upvote 0
Moonpie said:
H
Click to expand...
Sorry for the late reply, If you go on Amazon and search for picatinny riser, a page for Monstrum should come up with 3 different heights. The .83 or the 1” should do for your situation. Either should get you in a much more comfortable shooting position. I bought a different Buttstock that is a bit lower but in reality it wasn’t enough(pic attached)
IMG_4161.jpeg
 
  • Like
Reactions: Chasdog
Upvote 0
JoeWillie said:
Sorry for the late reply, If you go on Amazon and search for picatinny riser, a page for Monstrum should come up with 3 different heights. The .83 or the 1” should do for your situation. Either should get you in a much more comfortable shooting position. I bought a different Buttstock that is a bit lower but in reality it wasn’t enough(pic attached)
Click to expand...
I understand,day gets gone quick.
Think that base is what I ordered yesterday.
Where did you order the butt stock?
That may help me a good bit.
Pad on mine is hitting pretty high.
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu