Long winded, but full disclosure on rifle… For sale is a REPR Leshiy 2 450mm LW Barrel in 30 Cal with a new Tishina 450 mm 200 kit in Red with Black handguard. Also has the new Valkyrie grip with tools inside, comes with three red magazines, three black OEM magazine holders and one J. Kwan magnetic magazine rail holder. Also has the Leshiy 2 300-Bar 350-CC bottle.
Selling at a large discount for $2360 PayPal G&S, fees covered by me, shipped, and insured to lower 48 for amount paid. Discount to $2250 PayPal FF, shipped and insured for well-known members and friends I have relationships with on the Forum. My Edgun story is no secret, I am not selling a “perfect new rifle”, but everything in this advertisement, the good and bad, is worth much more than the price I am selling.
Before I removed and rebuilt the REPR on this gun, it was tuned by Sean at .3/.4 jets and 170 bar reg pressure, pushing the 44.75 hades at about 920 with a spread of about 10 in 8 shots. However, I wanted it a little more accuracy and to shoot the pellets a little slower. Degassed the gun and lowered regulator pressure to about 140. Then started working regulator back up to 3-5 bar at a time, clearing the plenum slowly with a few shots till I reached 165 bar (looking for speed of 910) and then at 150 bar the 0-ring blew on the end of the piston (no reason why this would happen as I was doing everything correctly, but it did). I think this was the point I decided to no longer own Edgun products, especially after my Edgun West issues. Here is that post for those that are curious. https://www.airgunnation.com/thread...n-west-and-the-l2.1255979/page-3#post-1263928.
Decided since I had to take the REPR apart I would replace the Delrin cup, ceramic ball, spring, clean and re-oil the washers and replace all the 0-rings. Other than the outer shell, the REPR is new however with that it does some reg creep after this rebuild, but this will happen till the ceramic ball is seated into the cup after a few hundred rounds. I did very lightly tap the ceramic ball with a punch inside the cup to help seat the ball a little bit and quicken the break in period. This is only slightly as any more pressure could damage the ball. I Leaned this trick from a friend on the forum. It’s not going to fix new regulator creep fully but will help break in happen faster. According to Brian at Edgun west “ALL REPR regs creep till about 200-500 rounds”. Exact quote, FYI.
I am the second owner of this gun. Bought it from CTShooter when I was having issues with my .25 Cal and Edgun West. CTShooter built the gun to sell on AGN and offered it to me, most of the rifle was new. Here is the link to the original sale – https://www.airgunnation.com/threads/spf-leshiy-2-30-custom-build-450mm-lw-barrel.1255422/
I have added many options since buying from Sean. I have shot about 200 rounds with CTShooter’s tune, even took it hunting in the Sierras last week and got a few chipmunks at 40 yards. Never any issue, gun worked perfectly, till I wanted to change the jets and reg pressure as stated above when I got home. The regulator issue on the rifle has been fixed with new rebuild.
List of extras…
Extra complete REPR regulator (Full rebuild, never installed – All new internal parts / set at 120 Bar before degas and stored)
Comes with REPR tool
Eagle Vision Moderator Adaptor
Full jet power kit, plus extra two .2 jets and extra .3 and .4 jet
About 8 red breech discs – one inside grip, one in gun (never have too many of these)
2 new 15mm pins to replace the 16mm pin that is currently in the gun for use with CF handguard. (Should be replaced as it is a little loose)
O-Rings
Current REPR on gun has been completely rebuilt and installed and set at 140-bar (never shot)
Full power train kit bought through Edgun West still in the bag
Valkyrie Moderator remove tool
2 extra magazine magnets
Magazine magnetic disc removal tool
Full CF mount with brand new hardware for CF handguard (special made so it’s perfectly plum with the gun base).
2 30 Cal red speed loaders
Fill probe
Miscellaneous new parts, pins, different sized springs, indexing arms, two new metal indexing rollers, one Delrin roller, regulator bottom cup, ceramic reg ball, etc. (see pictures for level of extras) – pretty much everything you would need to fix any issue you would have on the gun.
Again, rifle and all accessories are $2360 PayPal G&S, fees covered by me, shipping and insurance covered by me to lower 48. Discount to $2250 PayPal FF if I know you or you have a healthy amount of positive feedback. The new website has corrected many of the feedback issues, so I don’t feel this is unreasonable.
**Scope, Scope Mount, Scope Level, Edgun Digital Gauge, Fore grip not included in sale.
Just an FYI for potential buyers. I am stuck at work till this coming Friday (7 days). I am hoping to ship before that but Friday could be the date. Beyond my control. Sorry.
Selling at a large discount for $2360 PayPal G&S, fees covered by me, shipped, and insured to lower 48 for amount paid. Discount to $2250 PayPal FF, shipped and insured for well-known members and friends I have relationships with on the Forum. My Edgun story is no secret, I am not selling a “perfect new rifle”, but everything in this advertisement, the good and bad, is worth much more than the price I am selling.
Before I removed and rebuilt the REPR on this gun, it was tuned by Sean at .3/.4 jets and 170 bar reg pressure, pushing the 44.75 hades at about 920 with a spread of about 10 in 8 shots. However, I wanted it a little more accuracy and to shoot the pellets a little slower. Degassed the gun and lowered regulator pressure to about 140. Then started working regulator back up to 3-5 bar at a time, clearing the plenum slowly with a few shots till I reached 165 bar (looking for speed of 910) and then at 150 bar the 0-ring blew on the end of the piston (no reason why this would happen as I was doing everything correctly, but it did). I think this was the point I decided to no longer own Edgun products, especially after my Edgun West issues. Here is that post for those that are curious. https://www.airgunnation.com/thread...n-west-and-the-l2.1255979/page-3#post-1263928.
Decided since I had to take the REPR apart I would replace the Delrin cup, ceramic ball, spring, clean and re-oil the washers and replace all the 0-rings. Other than the outer shell, the REPR is new however with that it does some reg creep after this rebuild, but this will happen till the ceramic ball is seated into the cup after a few hundred rounds. I did very lightly tap the ceramic ball with a punch inside the cup to help seat the ball a little bit and quicken the break in period. This is only slightly as any more pressure could damage the ball. I Leaned this trick from a friend on the forum. It’s not going to fix new regulator creep fully but will help break in happen faster. According to Brian at Edgun west “ALL REPR regs creep till about 200-500 rounds”. Exact quote, FYI.
I am the second owner of this gun. Bought it from CTShooter when I was having issues with my .25 Cal and Edgun West. CTShooter built the gun to sell on AGN and offered it to me, most of the rifle was new. Here is the link to the original sale – https://www.airgunnation.com/threads/spf-leshiy-2-30-custom-build-450mm-lw-barrel.1255422/
I have added many options since buying from Sean. I have shot about 200 rounds with CTShooter’s tune, even took it hunting in the Sierras last week and got a few chipmunks at 40 yards. Never any issue, gun worked perfectly, till I wanted to change the jets and reg pressure as stated above when I got home. The regulator issue on the rifle has been fixed with new rebuild.
List of extras…
Extra complete REPR regulator (Full rebuild, never installed – All new internal parts / set at 120 Bar before degas and stored)
Comes with REPR tool
Eagle Vision Moderator Adaptor
Full jet power kit, plus extra two .2 jets and extra .3 and .4 jet
About 8 red breech discs – one inside grip, one in gun (never have too many of these)
2 new 15mm pins to replace the 16mm pin that is currently in the gun for use with CF handguard. (Should be replaced as it is a little loose)
O-Rings
Current REPR on gun has been completely rebuilt and installed and set at 140-bar (never shot)
Full power train kit bought through Edgun West still in the bag
Valkyrie Moderator remove tool
2 extra magazine magnets
Magazine magnetic disc removal tool
Full CF mount with brand new hardware for CF handguard (special made so it’s perfectly plum with the gun base).
2 30 Cal red speed loaders
Fill probe
Miscellaneous new parts, pins, different sized springs, indexing arms, two new metal indexing rollers, one Delrin roller, regulator bottom cup, ceramic reg ball, etc. (see pictures for level of extras) – pretty much everything you would need to fix any issue you would have on the gun.
Again, rifle and all accessories are $2360 PayPal G&S, fees covered by me, shipping and insurance covered by me to lower 48. Discount to $2250 PayPal FF if I know you or you have a healthy amount of positive feedback. The new website has corrected many of the feedback issues, so I don’t feel this is unreasonable.
**Scope, Scope Mount, Scope Level, Edgun Digital Gauge, Fore grip not included in sale.
Just an FYI for potential buyers. I am stuck at work till this coming Friday (7 days). I am hoping to ship before that but Friday could be the date. Beyond my control. Sorry.
Last edited:
