I received the light bars for my Competition Electronics digital link chrono today. Ran 10 RWS 7.0grain pellets through the Pardini K12 at 140bar. Pellets all in the black.
Extreme Spread of 4 FPS, Standard Deviation of 1 FPS.
Average Velocity 10 Meters from the muzzle was 544 FPS.
Second set of 10 RWS 7.0grain pellets at 75bar. Pellets all over the 10M target, in the White
,with some key holing near the bottom of the target. Extreme Spread of 48 FPS, Standard Deviation of 15 FPS.
Average Velocity 10Meters from the muzzle was 153 FPS.
I think I will start changing out Air Cylinders at 100bar from now on, and see if that pressure will allow the K12 to maintain enough velocity to clean the target.
The chronograph wouldn’t read the pellets until I hooked up the two light bars, made for indoor velocity readings.
Extreme Spread of 4 FPS, Standard Deviation of 1 FPS.
Average Velocity 10 Meters from the muzzle was 544 FPS.
Second set of 10 RWS 7.0grain pellets at 75bar. Pellets all over the 10M target, in the White
,with some key holing near the bottom of the target. Extreme Spread of 48 FPS, Standard Deviation of 15 FPS.Average Velocity 10Meters from the muzzle was 153 FPS.
I think I will start changing out Air Cylinders at 100bar from now on, and see if that pressure will allow the K12 to maintain enough velocity to clean the target.
The chronograph wouldn’t read the pellets until I hooked up the two light bars, made for indoor velocity readings.
