• Please consider adding your "Event" to the Calendar located on our Home page!

cleaning your target gun

"aa_limited"salticon yes agreed. its just nice to know what others are doing and or getting from their results.
Gotcha!, I give a light cleaning after about 70 shots, I use cotton patch wrapped up on a brass brush like a burrito, with balistol, follow up with dry patches, I leave alittle gray on last patch for seasoning. That's for my RAW .30
My BM500 is different, hardly do deep cleanings, I'll shoot 3 cleaning pellets between cards, 1first pellet is a abrasive pellet soaked in Balistol, follow up with 2 dry reg pellets.

this is after cleaning .30, one tin through 150 shots
 
I think every gun (barrel) is different, my Standard LW is every 30-40 shots,if I'm shooting for groups the groups let me know! The poly LW is 50-60 shots, but this also is with jsb's!,other brands differ!, you just need to determine your own method & timeline. I will say, I clean from the muzzle end, using a pull thru,but easy to do W/ the RAW's!
 
aa_limited,

I don;'t lean the bores of my air rifles/pistols as such.

After each session, they get a pull through with a VFG Pocket Kit, with the felt being impregnated with PTFE grease (Lupus grease in this case).

This is not for cleaning as such, but rather to preserve the bore and protect from rusting.

I live less than a 100 yards from the English Channel, in an old, cold, leaky, and not centrally-heated Victorian house.

Steel will rust as you look at it !

Have fun & a good Sunday,

Best regards

Russ