Umarex Completed my Umarex Notos!

[Savashouse]

Made a custom side pull lever, what do you guys think!

View attachment 491201

View attachment 491202

View attachment 491203

I would gladly purchase two of them . They're nice ...

 

[Surefire]

Any for sale?

 

[RAMJET66]

Any for sale?

 

[Surefire]

Any for sale?

Hey RAMJET66, I have a brand new Notos & am trying to mod it out. At the moment I'm purchasing a huma air drop bottle regulator, as well as the 300cc bottle. I was going to go with the FX STX barrel kit from 88 machining. Yet I heard that these things can be turned into a .25 cal. Any truth to that? I'm shooting for a powerful 50 yard slug slinger. If a 25 Cal conversion does exist. How would I go about making it happen? Thank you -SS

 

[Dkubany86]

Any for sale?

No sorry, I used 3/4 in angled aluminum though. I based it on the below. Post 480. Used 5020 jb weld. Do not leave any access it will get in the way.

Tuning - Umarex Notos has arrived.

Hello All, new member here. Just want to post the current mods on my Notos. I made a drop block to install a carbon fiber bottle (370cc) for more shot count. Then I decided to change to a longer barrel, 350 mm (13 3/4"). External reg set to 2K, this gives me 815 f/sec. on 18.13 JSB. Trigger has...

www.airgunnation.com

 

[RAMJET66]

No sorry, I used 3/4 in angled aluminum though. I based it on the below. Post 480. Used 5020 jb weld. Do not leave any access it will get in the way.

Tuning - Umarex Notos has arrived.

Hello All, new member here. Just want to post the current mods on my Notos. I made a drop block to install a carbon fiber bottle (370cc) for more shot count. Then I decided to change to a longer barrel, 350 mm (13 3/4"). External reg set to 2K, this gives me 815 f/sec. on 18.13 JSB. Trigger has...

www.airgunnation.com

ok thanks.

 

[Firewalker]

Hey RAMJET66, I have a brand new Notos & am trying to mod it out. At the moment I'm purchasing a huma air drop bottle regulator, as well as the 300cc bottle. I was going to go with the FX STX barrel kit from 88 machining. Yet I heard that these things can be turned into a .25 cal. Any truth to that? I'm shooting for a powerful 50 yard slug slinger. If a 25 Cal conversion does exist. How would I go about making it happen? Thank you -SS

I'm currently evaluating the Notos .25 kit from c88machining.

It's a real thing!

You need the FX barrel kit and then you need to purchase an FX liner.

 

[Firewalker]

I suggest buying an FX Maverick cocking lever/handle/screw from UA and make your own.

It allows the use of all mags as the angle lever sticks out too far.

 

[Pantanni]

I'm currently evaluating the Notos .25 kit from c88machining.

It's a real thing!

You need the FX barrel kit and then you need to purchase an FX liner.

What do you think of the .25 cal conversion kit? I might have found a buyer for my AR so that $700 notos might become a thing for me.