Daystate Converting an Alpha Wolf into a Delta Wolf?

[Airgunsteve]

I saw on YouTube a Daystate rep coverting a Daystate Delta Wolf into an Alpha Wolf using a conversion kit. I want to do the opposite and covert my Alpha Wolf into a Delta Wolf. Does anyone sell such a conversion kit? I contacted AOA where I purchased the rifle and they say that they have a couple of the parts but I would not be able to get the necessary screws/bolts.

Has anyone successfully converted their Alpha Wolf into a Delta wolf, and if so, where did you get all the parts?

I appreciate any help.

 

[Scotay42]

I sent you a message. What color is your alpha? I bet derrick Wall could help us out, or you out.

 

[cavedweller]

I saw on YouTube a Daystate rep coverting a Daystate Delta Wolf into an Alpha Wolf using a conversion kit. I want to do the opposite and covert my Alpha Wolf into a Delta Wolf. Does anyone sell such a conversion kit? I contacted AOA where I purchased the rifle and they say that they have a couple of the parts but I would not be able to get the necessary screws/bolts.

Has anyone successfully converted their Alpha Wolf into a Delta wolf, and if so, where did you get all the parts?

I appreciate any help.

All your doing is removing parts, but consider doing a AOA warranty transfer.

 

[Emu]

What I like the must on the Delta than in the Alpha, is the scope rail.

I like two support points for the rail in stead of just one.

 

[Trucker3573]

Can be done as the kits are available at A of A but man there are a lot better things you could do with 800 + dollars but to each their own.

 

[cavedweller]

What I like the must on the Delta than in the Alpha, is the scope rail.

I like two support points for the rail in stead of just one.

i still have a rail if you are in need just PM me.

 

[ctshooter]

I did this conversion when I had my Alpha and it's actually very simple and will not cost you a ton.

Get the Kraford and Lypt front ARCA rail for $150. It's super sturdy with no flex. You will re-use two screws from the Alpha stock with it and need to purchase two more M4 (IIRC) screws - can't recall length.

Get a standard AR grip of your choosing. You will need to transfer the sprng and ball from Alpha stock over to the grip to provide the 'click' on the safety.

For the Safety all you need to do is remove the two extension pieces (one on each side) - might need shorter screws once the extension pieces are removed.

Conversion complete - cost $200-225

 

[cavedweller]

I did this conversion when I had my Alpha and it's actually very simple and will not cost you a ton.

Get the Kraford and Lypt front ARCA rail for $150. It's super sturdy with no flex. You will re-use two screws from the Alpha stock with it and need to purchase two more M4 (IIRC) screws - can't recall length.

Get a standard AR grip of your choosing. You will need to transfer the sprng and ball from Alpha stock over to the grip to provide the 'click' on the safety.

For the Safety all you need to do is remove the two extension pieces (one on each side) - might need shorter screws once the extension pieces are removed.

Conversion complete - cost $200-225

I prob have all the needed parts to convert back to Delta from Alpha. Just PM me and i will check my stuff out.

 

[Airgunsteve]

Thanks everyone for all the advice. I like the ideal of $200-$250 for the conversion.

 

[OldDude]

I did this conversion when I had my Alpha and it's actually very simple and will not cost you a ton.

Get the Kraford and Lypt front ARCA rail for $150. It's super sturdy with no flex. You will re-use two screws from the Alpha stock with it and need to purchase two more M4 (IIRC) screws - can't recall length.

Get a standard AR grip of your choosing. You will need to transfer the sprng and ball from Alpha stock over to the grip to provide the 'click' on the safety.

For the Safety all you need to do is remove the two extension pieces (one on each side) - might need shorter screws once the extension pieces are removed.

Conversion complete - cost $200-225

Thanks for the info, @ctshooter. As you said, the conversion is fairly simple.

As for the grip, I’ve recently ordered the grip+cheek piece from FORM. Couldn’t be happier.

 

[Scotay42]

I have a delta and would love an alpha. I would pay shipping for both of ours to go to derrick Wall to swap out both of our guns, ut I got no response back on my message. Lol, i figired no cost would be better than 2-300$.