Corbin vs Presslug

[ZekeZX10]

I was attacked by a sweet potato, had to defend myself

 

[ZekeZX10]

Groups at 100 yards with 62gn Flat base slugs made with Thor Press and a slug after it hit two water jugs

 

[ZekeZX10]

Groups at 100 yards with 62gn Flat base slugs made with Thor Press. Definitely capable of moa groups

 

[ZekeZX10]

Wasting water in the desert, not good but couldn't help myself. Interesting results with 62gn hollow pt slug at 957fps...perfect expansion

 

[ZekeZX10]

Lizard at 100 yards victim of a Thor press 60 grain slug ... Head shot

 

[Ta-Ta Toothie]

So, the press is meeting your expectations. Is there any slop or play in it?

 

[ZekeZX10]

So, the press is meeting your expectations. Is there any slop or play in it?

No complaints, seems tight. I've made about 600 slugs so far and hasn't developed any play.

 

[IMADMAN]

Groups at 100 yards with 62gn Flat base slugs made with Thor Press. Definitely capable of moa groups

Not bad. Thor Molds has another thread with the block type swage. Waiting for them to post up accuracy tests with those to see how it compares to their press.

 

[Ta-Ta Toothie]

No complaints, seems tight. I've made about 600 slugs so far and hasn't developed any play.

Sounds good. Can't wait until I get mine.

 

[ZekeZX10]

Sounds good. Can't wait until I get mine.

Check out this rabbit I just took https://www.airgunnation.com/thread...rs-and-how-to-achieve-it.1306038/post-1744186

 

[Ezana4CE]

The shape of the ogive is why, more rounded less narrow

View attachment 463918

@ZekeZX10 How does altering the ogive affect the projectile diameter? At times are you increasing diameter by one or two thousandths? Or is it possible that the hollow point cavity is smaller or the walls become thicker?

 

[ZekeZX10]

@ZekeZX10 How does altering the ogive affect the projectile diameter? At times are you increasing diameter by one or two thousandths? Or is it possible that the hollow point cavity is smaller or the walls become thicker?

It is more rounded at the top not so narrow. Base of the slug doesn't change diameter it's just the narrowing of the nose. So a 1.5-E Ogive will weigh less than a 1/2-E Ogive given the same length because it has less mass up towards the nose

 

[Ezana4CE]

@ZekeZX10 I’m thinking in terms of hollow points. Does what your saying only apply to round nose projectiles?

 

[ZekeZX10]

@ZekeZX10 I’m thinking in terms of hollow points. Does what your saying only apply to round nose projectiles?

No the exact same thing they just have hollow points

 

[Ezana4CE]

@ZekeZX10 I’m missing something here. I’ll review your videos and see if the info I’m lacking is in them.

 

[Kscott]

Not sure why this video didn't post with my previous post but here is the results of an extremely windy afternoon but the Thor Press Slugs definitely have potential very consistent definitely can get under one moa at 100 yards

 

[Kscott]

That’s nice they are consistent. Just curious though, the Corbin press and die set lead and cutter are only $1699. I can also swage my 308 jacketed hunting rounds on the same press which is super awesome.

 

[kevtan]

That’s nice they are consistent. Just curious though, the Corbin press and die set lead and cutter are only $1699. I can also swage my 308 jacketed hunting rounds on the same press which is super awesome.

If I buy this press its because
1. its cheaper with the included 1 die set
2. extra die sets are 350 a set
3. no need for jacketed projectiles by law
4. pay its delivered
5. its a hobby, no reason needed - I might have the corbin press and got this cos .....
Its like having an expensive luxomobile but getting a cheap run about.
6. its a pain to reset the press again to do other slugs

But most of all its about having fun. You can get in the Zen when pressing out the slugs.

 

[Engg.Ken]

If I buy this press its because
1. its cheaper with the included 1 die set
2. extra die sets are 350 a set
3. no need for jacketed projectiles by law
4. pay its delivered
5. its a hobby, no reason needed - I might have the corbin press and got this cos .....
Its like having an expensive luxomobile but getting a cheap run about.
6. its a pain to reset the press again to do other slugs

But most of all its about having fun. You can get in the Zen when pressing out the slugs.

"Zen" I think I can think of this with our Freedom 2 line of press system.

 

[kevtan]

"Zen" I think I can think of this with our Freedom 2 line of press system.

I know you……. Freedom 1 does it as well.