Crosman 2200 Magnum - Disassembly and rebuild = reinstated pester

[iAMzehTOASTY1]

I hear you I just recently pulled the trigger spring from the 2289 (have mod it in the pass) again because I wasn't all that happy with it. I went ahead and cut a couple of coils off and played with the pulling/compressing of it and feel its better, however tomorrow will be the real test at the range

I played around in mine a bit
Mine was too soft for me. Put a little piece from a pen in there. Then magnets for the screws just mounting taped in. Gives the handle a magnetic quality as well. Thinking I could find me a small metal container that would contour to the grip somehow as storage for pellets while helping retain my screws when grips are removed.

 

[Simplemann]

I played around in mine a bit
Mine was too soft for me. Put a little piece from a pen in there. Then magnets for the screws just mounting taped in. Gives the handle a magnetic quality as well. Thinking I could find me a small metal container that would contour to the grip somehow as storage for pellets while helping retain my screws when grips are removed.
View attachment 374110View attachment 374109View attachment 374111

I used the old 22 casing trick which works well