Crosman Crosman 2240 PCP

[protec52]

Hi. i want to make my 2240 PCP.
fill assembly for Benjamin Marauder air rifles works in crosman 2240
I heard that people uses Benjamin discovery fill assembly, but Archer airguns don´t send to México.

thanks

Manuel

 

[Pale_Rider]

It can fit if you machine threads for the tube. Although I wouldn’t trust a 2240 tube that’s rated for co2 pressure. Might be making a pipe bomb. I’ve heard the non stamped 2240 tubes are ok but why take the chance? If you want a 2240 pcp tube I’ll sell you one that was built to hold 3000 psi. It was made by Don Cothran. Stainless steel with a fill assembly and fill cap. I will PM you.

 

[protec52]

Thanks Pale Rider. I will check mail.
My gun has a 13" .25 barrell so if you have a 2240 or 2250 tube is better(more air) and how many psi can hold the crosman 2240 valve?
Thanks

 

[Avator]

You'll want to pin that valve.

 

[protec52]

pin it isn´t a problem. I can do it.
thanks

 

[Avator]

I have a couple carbines I did with the 2260 tubes and disco fill assemblies but I only fill to 2k. I pinned those valves as well.
FYI.. HPA is hard on the stock poppets. You might want to consider an upgrade.

 

[SteveV]

Hi. i want to make my 2240 PCP.
fill assembly for Benjamin Marauder air rifles works in crosman 2240
I heard that people uses Benjamin discovery fill assembly, but Archer airguns don´t send to México.

thanks

Manuel

You'll want the fill assy. for a Marauder PISTOL

 

[marflow 777]

first of the 2240 tube isn't rated for any pressure because the tube takes none
the CO2 cart seals on the valve face
back in the day when there were few if any PCP pistol the 2240 was use as a base you pinned the valve got all the gear and made a low pressure PCP
be we are not in those times there are cheap PCP pistols out there for sale, in Mexico i have no idea