AirMaks Arms Current Krait setup

[Preston shoreline]

! I’ve really enjoyed the krait platform .. I will probably get the krait X as well

 

[Mr.H]

I'm considering the Krait Lite L (wood furniture) in .22. Besides the furniture, what are the other differences between the two models? What can I expect as far as fps shooting MRDs?

 

[acacobra]

I've found the same with my Krait regarding the hammer spring. It's very sensitive and becomes extremely inconsistent for the first several shots after sitting unless I have it turned up pretty high.

Yes. As long as the hammer spring is aroundc 80% maxed mine is very consistent. Even after sitting for a few days the first shot/s are dead on. All my FX guns are not, it takes a couple shots. Have you adjusted your regulator yet?

 

[dens228]

Yes. As long as the hammer spring is aroundc 80% maxed mine is very consistent. Even after sitting for a few days the first shot/s are dead on. All my FX guns are not, it takes a couple shots. Have you adjusted your regulator yet?

My gun came with a faulty reg. It wouldn't adjust. I couldn't turn it at all. Utah sent me a quick replacement for it. The original was set at 105 or something like that. With the hammer spring being what it is I tried to go lighter with the hammer as it was firing way to hot and loud. Now I have it set at 92, it doesn't seem to want to go lower but it's perfect right there. Very consistent from shot to shot, even after sitting for days.

 

[PumaCarl]

Just a thought, since you guys are getting hammer inconsistencies at lower settings you should probably check your hammers finish and clean off any liquid lube. I run all my hammers dry, with a touch of graphite and I can shoot in the heat or the freezing cold and my settings don't fluctuate.