HW/Weihrauch Curse of the HW50

[patrikky]

Wow. With that much the solution might be to remove action, put in vise, cock it and pull the trigger

My thoughts exactly

 

[Mycapt65]

My thoughts exactly

I though this unnecessary to say earlier. BUT NO!

 

[blackdiesel]

I was able to grab one from AoA recently. I hope it's unaffected by this.

 

[cjtamu]

I though this unnecessary to say earlier. BUT NO!

If anyone takes that seriously I think you have to let it go. Airgun Darwinism LOL.

 

[Mycapt65]

If anyone takes that seriously I think you have to let it go. Airgun Darwinism LOL.

True. Yet you never know the attainable depths of stupidity on the internet.

 

[crowski]

One more thing if a guy got 2 of them and ones nice and straight as it should be is remove the barrels and stock lay the barrels on top of each other and look at or for any difference between the good one and bad.. then the same for the tube/ receiver where the locking takes place .

Being that bad of droop whatever the cause could be seen . If you get my drift on a real side by side inspection..

I do have more than one 50, but winter job.
I did measure the muzzle end, same as breach.

And a straight edge. It’s straight.
I will compare the 2 - 50’s. Crow
wrote this hours earlier but didn’t send

 

[patrikky]

I though this unnecessary to say earlier. BUT NO!

And it still is unnecessary to say.