Daystate Daystate Delta wolf with Ultra valve!

[Ashiii]

What speed were you shooting those 25gr JSBs to get that kind of accuracy? And what reg pressure?

Heating the penny just was a good luck with pellet!, but reg pressure was at 157. Speed was 950

 

[Easy E]

Daystate Howler makes a slug in 22cal you can but from Arizona airguns that claim sub Moa with ARC barrel on Delta Wolf! They are made by Neilson
for Daystate

 

[Ashiii]

Daystate Howler makes a slug in 22cal you can but from Arizona airguns that claim sub Moa with ARC barrel on Delta Wolf! They are made by Neilson
for Daystate

Thank you

 

[Corvid_hunter]

I always thought they were made by JSB.

 

[Arzrover]

The Howler is a 20.5 gn NSA packaged in a DS tin. They were chosen for the Howler name because they have consistently been good across a number of rifles. The bc is little to none better than a MRD but for hunting, they're extremely effective on smaller game. The Howler name is similar across all the calibers... best overall performer for a variety of rifles... all made by NSA...
Bob

 

[Airgunmann]

I see yours is 22 but I’m curious if anyone that stumbles across this has a .25. I’m just wondering how high of a reg pressure is recommended to run 33.95 900 fps ? The only possible downside I see. Daystate seems to need a much higher pressure. I run them at 925-930 out of my M3 at only 120 bar.

My friends is a 25 cal but it doesn't have the ultra valve and it will push them around 900 at 160 bar and think 175 was higher than 900
You still can tune the gun how ever you want in advanced mode but we haven't really messed with that end of it a whole lot to see what all the reg settings will do
They are pretty nice rifles

 

[Ashiii]

It’s a barrel clamp like the one they added to the Impact a few years ago. Not a tensioner.

Thank you for your info buddy! I install that new clamp and its make a big difference.

 

[tibor]

nice shot..on the penny. question what scope are you using on the impact..

 

[Ashiii]

nice shot..on the penny. question what scope are you using on the impact..

Thank you buddy. It's Athlon Ares BTR gen2 hd 4.5-27×50. For the price it's really good.

 

[CarlJ]

I purchased a Alpha Wolf in 30 cal used. Is there way to know which valve is installed?

CarlJ

 

[Solo1]

I’m not positive but I think any gun made after 2021 has the ultra

 

[Airgunmann]

I purchased a Alpha Wolf in 30 cal used. Is there way to know which valve is installed?

CarlJ

Depends on. If it is older a year or two old may or may not have it

 

[Ashiii]

I purchased a Alpha Wolf in 30 cal used. Is there way to know which valve is installed?

CarlJ

congrats it is an amazing rifle, I don't know that. I installed barrel clamp on it too which makes it even more accurate.

 

[OldDude]

I purchased a Alpha Wolf in 30 cal used. Is there way to know which valve is installed?

CarlJ

I have an older model. So, I had to order the ultra valve. When I received it, it looked identical to the one I had. AoA guys confirmed, the internals of the valves are different.

 

[CarlJ]

I have an older model. So, I had to order the ultra valve. When I received it, it looked identical to the one I had. AoA guys confirmed, the internals of the valves are different.

Serial #AL0533 if that narrows the year of manufacturer.
Thanks to all who responded.

AshIII , I installed the barrel clamp and it did improve accuracy also.