Degas PP700s-a & Set Point on Huma

[sald]

I should have my Artimis PP700S-A Friday and not sure when I will get my Huma Regulator. The PP700S-A is a Canadian Sourced gun.

Three Questions:

1-Other than dry firing, is there another way to degas the air tube?

2-I am looking for no less than 12FPE with JSB 15.89 or 18.13 grain pellets. Off the top of my head I think that 565 fps should get me there with the 18.13 What would be a good start for the regulator setpoint in BAR?

3-I believe I will need to drill out the transfer port to 5/32" (.156) to stay under the 75% of pellet with only having a standard drill bit set.

Other thought?

 

[Vetmx]

1. Make sure gun is unloaded. Grab the grip in reverse so the pistol is pointed at you. Put the hammer on the edge of a table (not your wife’s dining room table) and push down. You will be pressing the hammer into the valve pin and it will degas. I do mine in little bursts.

2. 120b is a good starting point since you aren’t shooting for the moon.

3. That should do the trick

 

[JungleShooter]

[Delete post]

 

[sald]

Thanks!

As for the TP drill out, am I correct?

Nevermind, saw you answered by question number.