Diana Diana 48 - Journey Update w/ happy ending

-8C is equal to 17.6F.......Not even close to "sub-freezing temperatures" as he says.......Not much contraction in the spot weld at 17.6 degrees. LOL
This is total B.S.
The man deserves a new 48, those spot welds were not done right, total manufactures defect!
I'm pretty certain that anything under 32°F is "Sub Freezing" Just saying.
 
can i get the serial number to give the Hector
manufacture date 12-2021
did the rifle get to the point of being the outdoor temperature at the time

Hectors post to me

Mike

I had never seen anything like it.

But then it is strongly disadvised to shoot springers in sub-freezing temperatures.

For sure the lubes are in a complete state of inoperation and the seals will also suffer.

The contraction in the spot welds could have been strong enough to create this problem.

Not that DIANA won't stand behind their product. Just a note to let users know that working under these conditions is not what the guns were designed for.

If you can ask the serial number and the date of manufacture, I'll see what I can do. Though I don't think it's going to be an easy task we' ll give it a try.

Keep well and shoot straight
Ive hunted in "sub freezing" temps for 20 years with springers and haven't had any lubes that were "completely inoperable" or seals fail. Or anything break for that matter.

Glad I have my boots on, the bull$#!t seems to be getting deep.
 
Hi everyone.

Scott isn’t wrong, -8C is definitely sub-freezing. I couldn’t find anything about a temperature limit in the manual though.

It seems reasonable for me to expect the rifle’s metallurgy to function in such temperatures. It’s cold, but it’s not that cold. My bike frame doesn’t fall apart when I head to work on the -30C bone chiller mornings. And it was way cheaper than my model 48.

I would like to state that I was very meticulous in caring for this rifle. It’s ate north of 6-10 tins of pellets and has hardly a scratch to show for it. Absolutely no rust anywhere. Every shooting trip, the gun is allowed to reach ambient temp during the ~30 minute walk to my range.

Upon returning home, the gun was placed in the bathroom on the heated floor to quickly dry any condensation. Once the gun was dry it got a nice wipe down, screws checked, and a pull thru or two to clear the bore of any moisture.

My background is in mechanical engineering, and I like caring for the gear that cares for me. It’s not like I was out there pouring liquid nitrogen on the receiver and trying to kick-start it like a 125cc Yamaha.

If I didn’t shoot in sub-freezing temps, I probably wouldn’t shoot for over half the year here in Finland lol.
 
Hi everyone.

Scott isn’t wrong, -8C is definitely sub-freezing. I couldn’t find anything about a temperature limit in the manual though.

It seems reasonable for me to expect the rifle’s metallurgy to function in such temperatures. It’s cold, but it’s not that cold. My bike frame doesn’t fall apart when I head to work on the -30C bone chiller mornings. And it was way cheaper than my model 48.

I would like to state that I was very meticulous in caring for this rifle. It’s ate north of 6-10 tins of pellets and has hardly a scratch to show for it. Absolutely no rust anywhere. Every shooting trip, the gun is allowed to reach ambient temp during the ~30 minute walk to my range.

Upon returning home, the gun was placed in the bathroom on the heated floor to quickly dry any condensation. Once the gun was dry it got a nice wipe down, screws checked, and a pull thru or two to clear the bore of any moisture.

My background is in mechanical engineering, and I like caring for the gear that cares for me. It’s not like I was out there pouring liquid nitrogen on the receiver and trying to kick-start it like a 125cc Yamaha.

If I didn’t shoot in sub-freezing temps, I probably wouldn’t shoot for over half the year here in Finland lol.
Too bad you're in Finland, I'd repair your rifle for free.

By the sounds of it, you may have to repair it yourself. It seems Blue Line is a joke to deal with by doing some google search reviews?

Please keep us posted on how the Warranty goes.
 
Too bad you're in Finland, I'd repair your rifle for free.

By the sounds of it, you may have to repair it yourself. It seems Blue Line is a joke to deal with by doing some google search reviews?

Please keep us posted on how the Warranty goes.
I’ll give Diana their credit, whichever way it goes.

But if I have to repair it myself, it’s going to end up looking an awful lot like an HK77k.
 
I’ll give Diana their credit, whichever way it goes.

But if I have to repair it myself, it’s going to end up looking an awful lot like an HK77k.
Can't say that I blame you. Get you one in .177 and I think you'll be very happy with it. If you like open sights, you can also fit the standard Weihrauch front globe to the HW77K, which is great.
 
  • Like
Reactions: EquivalentDelta
I’ll give Diana their credit, whichever way it goes.

But if I have to repair it myself, it’s going to end up looking an awful lot like an HK77k.
You can't go wrong with a Weihrauch......I have a HW97KT and I really like it.

I'll keep my fingers crossed that the warranty department will take care of you......I really like my Diana 48 as well.
 
  • Like
Reactions: EquivalentDelta
Can't say that I blame you. Get you one in .177 and I think you'll be very happy with it. If you like open sights, you can also fit the standard Weihrauch front globe to the HW77K, which is great.

That was my biggest gripe with my 48, the front post was fatter than a coon, and there’s no good way to change it on a T06.

A set of globes would’ve been a dream come true.
 
Last edited:
  • Like
Reactions: thumper